ABC and Tracs Light on

Dimbor · Post by **Dimbor** » 05 Jun 2015, 17:11

1999 Volvo V70 Base
Three months ago I have ABC and Brake light came ,I open ABC board and check up, I find a capacitor loos and I try to find the location and I cand find ,I Don't have any problem in 3 Month nothing came on.Know this ABS ans Tracs light on ,when I drive on Rough Rode in low speed transmission do not work OK,sometime check engine light is and cod P1054(low fuel pressure)
Can somebody help me with this problem ,what can be wrong

Please Dimitry.

Post by **misha** » 05 Jun 2015, 17:53

Find Matty Moo on this forum and send him a pm.He rebuilds those modules succesfully and gives lifetime warranty.

Post by **BEJinFbk** » 05 Jun 2015, 18:57

With your '99, the ABS generates the speed signal
used by many of the systems in your car, including
the transmission. You really should get it fixed:

https://midwest-abs.com/

Matty at Midwest is the man!

Post by **JBC2565** » 05 Jun 2015, 20:06

ABS light??? Yes, you need to replace your ABS module. +1 and finding Matty Moo. Pretty easy to replace.

Post by **Ozark Lee** » 05 Jun 2015, 20:29

Since you have already split the case open you really need to resolder the connector pins, all of them but particularly the large pins that power the modulator pump, if you really want to do it yourself. You may have had a loose capacitor but that would be rare. The failure point is always at the connector pins.

...Lee

Dimbor · Post by **Dimbor** » 07 Jun 2015, 00:26

I can't find the original Capacitor I purchase 2 the same size with $ 0.15 cents but the problem is I can't find the loosed capacitor location I looked with magnifier glass every 1/4 of inch,How do I find the schematics.
The Dealer, Sell me remanufactured ABS for $950.00.
Thanks for your Suggestions .
Dimbor

Post by **Ozark Lee** » 07 Jun 2015, 07:44

You won't find schematics since they are not in the public domain. As has been suggested, you can send the module to Midwest ABS and have Matty rebuild it and test it for around $75.00.

https://www.midwest-abs.com/ABS_Modules.php

There are some other rebuilders as well. Victor Rocha and Module Masters come to mind but they are typically more expensive than Midwest. Once you start trying to change components on the board all bets are off though. There is only so much butchery the rebuilders can deal with.

...Lee

Post by **Matty Moo** » 07 Jun 2015, 09:29

Which capacitor did you break off? There are two of them.

B234R · Post by **B234R** » 07 Jun 2015, 09:52

misha wrote:Find Matty Moo on this forum and send him a pm.He rebuilds those modules succesfully and gives lifetime warranty.

I´m a very satisfied Matty Moo customer. My module is working flawlessly after two years.

Dimbor · Post by **Dimbor** » 08 Jun 2015, 14:33

I did not broke the capacitor when I open the case , The pins close with the shell are melted it.
One capacitor it's there about 2 a clock.
Can somebody tel me where the second capacitor locations it's

Dimbor