97 850 glt evapor coil what is this part called?

1ezliving4ume · Post by **1ezliving4ume** » 12 Jul 2015, 09:16

We I'm into the evaporator coil, its like a wars zone inside my car. Evertime I think I'm going to start putting it back together I fined something else broke

This little plastic arm thing is over by the fan and runs a damper between the fan and evaporator coil. What is it called so I can get a new one?

Post by **abscate** » 12 Jul 2015, 09:23

You can glue that back together with some JB weld nicely.

The fixit engineer in me suggest a thin wire bent into a U around the square hole end, wrap the two legs of the U up high with several turns of thin wire, then bond wire and plastic with JB-Weld

Damper motor connector is what Alldata calls it ..I suspect it's the one for the blend door

1ezliving4ume · Post by **1ezliving4ume** » 12 Jul 2015, 10:46

I like your fix, I'll try it and post pic.'s

1ezliving4ume · Post by **1ezliving4ume** » 12 Jul 2015, 12:30

I used quick silver ILO JB weld. Think it will work?

Post by **abscate** » 12 Jul 2015, 18:56

Nicely done. That will hold especially if you got some tension on that wire going around