Login Register

2012 C70 Transmission computer

Help, Advice, Owners' Discussion and DIY Tutorials devoted to the second generation C70, S40 and V50 Volvos -- awkwardly model year 2004 ½ onwards -- plus where to go for advice and discussion on Volvo's sporty C30 Coupe powered by Volvo's ubiquitous inline 5-cylinder power plant.
Post Reply
007
Posts: 87
Joined: 23 August 2011
Year and Model: XC90 0406, 2012 C70
Location: USA-Nicaragua

2012 C70 Transmission computer

Post by 007 »

Hi, I would like to know if I replace the original trans comp of my 2012 C70 for a 2006 or 2008 C70, should the car works fine as "plug and play"? Or is it mandatory to take it to the dealer for reprogram, Because the software is not he same?

Thanks for reading!
Top
precopster
Posts: 7543
Joined: 21 August 2010
Year and Model: Lots
Location: Melbourne Australia
Has thanked: 8 times
Been thanked: 128 times

Post by precopster »

It's a dealer job. Modules are coded to the CEM and car won't start.
Current cars VW Transporter 2.5TDI, 2010 XC90 D5 R Design
Top
007
Posts: 87
Joined: 23 August 2011
Year and Model: XC90 0406, 2012 C70
Location: USA-Nicaragua

Post by 007 »

Hi, thanks for your reply. And what if I would have to replace all the transmission for this car, with a 2011 C70 one, and this (2011) has attached the control module part #30735596? a dealer programming would be mandatory? Thanks for your attention!
Top
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “C30, C70 2006+, S40 & V50 2004 ½ +”