My XC90 under load started running really rough yesterday. It has thrown the following codes P0300 P0301 P0303 and P0140. These codes come right back P0300 P0301 P0303. I have replaced all plugs, replaced Coil Packs for Cylinders 1 & 3 and also replaced the Cam Shaft Sensor. If anyone has any ideas please let me know. There was no CEL on until the car started to run rough.
Thanks in advance for your help.
Car Runs Rough P0300 P0301 P0303
-
timothyha22
- Posts: 2
- Joined: 6 December 2015
- Year and Model: 2006 XC90
- Location: Georgia
-
tailor
- Posts: 570
- Joined: 12 November 2006
- Year and Model: 2004 XC90 2.5T AWD
- Location: Toronto
- Been thanked: 2 times
This may or may not help, had a similar issue of misfire when i changed the plugs on our Envoy. The boot to the plugs where not seated correctly . Go in again and check the seating on the coil packs for the cylinders that are returning a misfire.
1994 850 Auto Turbo wagon 306000km (Sold)
2004 XC90 AWD 188000km
"Life is like a reel to reel tape recorder,
the closer you get to the end,
the faster it spins."
Abe Gottschalk
2004 XC90 AWD 188000km
"Life is like a reel to reel tape recorder,
the closer you get to the end,
the faster it spins."
Abe Gottschalk
-
timothyha22
- Posts: 2
- Joined: 6 December 2015
- Year and Model: 2006 XC90
- Location: Georgia
Will do that this afternoon. Thanks for the reply
-
- Similar Topics
- Replies
- Views
- Last post
-
- 18 Replies
- 3814 Views
-
Last post by mecheng
-
- 3 Replies
- 1417 Views
-
Last post by WhatAmIDoing






