850 // How to disconnect the fuel line?

volvofornia · Post by **volvofornia** » 08 Jan 2016, 14:55

All right, I'm half way through changing my PCV but I got stuck on how to replace the fuel line from the injector rail.

On other pics there are some nuts and bolts which connect the fuel line to the rail but in my case it's just one line going into the rail. So what to do now?

Any ideas?

skloon · Post by **skloon** » 08 Jan 2016, 15:31

there should be a torx screw holding a little u like clip the screw is under the fitting- undo screw-remove bracket and don't drop into enginge compartment wiggle fitting free

volvofornia · Post by **volvofornia** » 08 Jan 2016, 15:37

See it. It stuck though. Might use pblaster first.

Post by **tryingbe** » 08 Jan 2016, 20:58

There is no need to disconnect the fuel hose. Just undo the two T25 bolts, one on top of the engine and one on the back of the engine and move the rail with the injectors out of the way.

volvofornia · Post by **volvofornia** » 09 Jan 2016, 00:25

I did that. Thank you

Post by **tryingbe** » 09 Jan 2016, 05:38

You're welcome.

I took the engine/trans out without disconnecting the fuel rail.