02 S60 vacuum hose and turbo vacuum hose routings?

jeffriehunter · Post by **jeffriehunter** » 09 Jan 2016, 09:52

When we replaced the head gaskets on this one (did that in home shop) I am not sure we got all the vacuum hose and turbo control hoses (the small ones) all routed correctly. I haven't been able to find a good diagram anywhere. And suggestions or routing guides available??

sparky65 · Post by **sparky65** » 11 Jan 2016, 19:29

There should be a vacuum routing diagram sticker on the underside of the hood.

jeffriehunter · Post by **jeffriehunter** » 12 Jan 2016, 12:57

I will check.....would it be under the insulation material?

Post by **abscate** » 12 Jan 2016, 19:08

Visible on my P2 way up near the driver corner of the hood. If you stand in front of the engine with the hood up you can't see it. You have to stick your head in from the side and turn sideways

jeffriehunter · Post by **jeffriehunter** » 13 Jan 2016, 07:21

Well hush my mouth sparky65!! There is a diagram there.....in all of our work on this car I somehow never saw that....what a great help!!

THANK YOU!!

sparky65 · Post by **sparky65** » 15 Jan 2016, 19:31

Well, they didn't exactly put it in a great spot, did they?

jeffriehunter · Post by **jeffriehunter** » 16 Jan 2016, 14:02

You have to laugh....I had never noticed it before. It was very helpful once we found it thanks to the forum and abscate!

Post by **abscate** » 16 Jan 2016, 15:26

Now that you found it you have to check that it's the right one..