Login Register

gear position sensor cleaning

Post Reply
tradan333
Posts: 3
Joined: 15 Oct 2014, 12:17
Year and Model: v70 2000
Location: montreal

Post by tradan333 »

Hi everybody,
I have Volvo v70 ,2000 familial, I have a problems with gear position sensor which gives a faulty signal to the transmission.
my mechanic said this is common problem with this model, and simply the contacts of the sensor( solenoid) should be cleaning.

Does any one where is the sensor located, and how to clean the contacts.
I found a guide for 1995 VOLVO 850, is this the same procedure ?

Any help from any member should be really appreciated.
Thanks in advance
Dan

Ozark Lee
MVS Moderator
Posts: 14798
Joined: 07 Sep 2006, 08:24
Year and Model: Many Volvos
Location: USA Midwest
Has thanked: 4 times
Been thanked: 76 times

Post by Ozark Lee »

It is the same switch and the same procedure. Rather than just cleaning them I think most folks sand them back flat since over the years they get grooves worn into the contacts. The PNP is the switch on the top of the transmission where the shifter lever hooks up to the transmission. They also make replacement contact kits that are fairly cheap.

Repairing the switches is actually easier than replacing them due tot he way that the electrical connector is segmented.

...Lee
'94 850 N/A 5 speed
'96 Platinum Edition Turbo
Previous:
1999 V70XC - Nautic Blue - Totaled while parked.
1999 V70XC - RIP - Wrecked Parts Car.
1998 S70 T5
1996 850 N/A
1989 740 GLT
1986 740 GLT
1972 142 Grand Luxe

Post Reply
  • Similar Topics
    Replies
    Views
    Last post