Login Register

2008 S60 2.5T Front Strut Question

Post Reply
Steve H
Posts: 89
Joined: 15 Feb 2016, 12:27
Year and Model: 2008 S60 2.5T & XC70
Location: NC
Has thanked: 6 times
Been thanked: 10 times

Post by Steve H »

Does the front strut have a rubber seat between the actual strut and the spring or the lower side of the spring? Volvo parts does not show one but Monroe sells one. This would be like a rubber insulator for metal to metal contact between the spring and strut. Again this is the lower side of the spring. Thank you.

User avatar
oragex
Posts: 5347
Joined: 24 May 2013, 06:20
Year and Model: S60 2003
Location: Canada
Has thanked: 102 times
Been thanked: 352 times
Contact:

Post by oragex »

Don't know for the 2008 models, but on earlier models there is none. The spring sits directly on the metal frame around the strut and it doesn't move. I see no reasons why there would be such insulator other than for a little extra damping smoothness perhaps or to prevent the paint at the bottom of the spring to crack and cause the spring to rust - spring breaking because of rust is not uncommon

Steve H
Posts: 89
Joined: 15 Feb 2016, 12:27
Year and Model: 2008 S60 2.5T & XC70
Location: NC
Has thanked: 6 times
Been thanked: 10 times

Post by Steve H »

Thank you. I did order them but then realized Volvo does not show them. I will see how they fit the spring and lower strut spring holder when I do the install.

vtl
Posts: 4936
Joined: 16 Aug 2012, 13:35
Year and Model: 2005 XC70
Location: Boston
Has thanked: 130 times
Been thanked: 686 times

Post by vtl »

I think there was an update in later years. When I replaced suspension on 02 there was lower insulator listed in VIDA (2011 or 2012 IIRC), original suspension didn't have it. For 05 there was upper insulator also, originally was not there.

My feeling is that these insulators lower road noise.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post