1990 740 Turbo Temp Gauge sender thread...

5ft24 · Post by **5ft24** » 05 May 2016, 12:27

Does anyone kn ow what the thread is in the head for the Temperature gauge sending unit?
Aftermarket gauge is 1/8" pipe. bought a 1/8 to 1/4 bushing and a 1/8 to 3/8 bushing... 1/4 pipe is too small, 3/8 is too big.
Also, is the oil pressure sending unit also going to be some odd size?
Thanks

93Regina · Post by **93Regina** » 05 May 2016, 18:53

5ft24 wrote:some odd size?

Nothing odd, until Jimmy Fixer comes along...

: Capture (2).PNG (215.51 KiB) Viewed 1063 times

5ft24 · Post by **5ft24** » 12 May 2016, 20:01

that is for the sensor for the computer.
The gauge sender, I found out, is a 5/8-16 UNF thread...