ABS/ Anti Skid Message??

toxtreme · Post by **toxtreme** » 15 Jun 2016, 07:17

I have a 2006 S60 2.5T that I just started getting the ABS warning light on, and the Anti Skid service required message popping up. This goes on and off but seems to consistently pop up when I either put the car in reverse or apply the parking brake, any suggestions on what to look at first?

01_Nautic_V70 · Post by **01_Nautic_V70** » 15 Jun 2016, 07:27

First, easiest thing to check is tire pressure and lug tightness. Any unusual noises happening?

nsjames · Post by **nsjames** » 15 Jun 2016, 08:28

without scanning the BCM and getting the code you'll find that it's a wild goose chase.

Could be power supply issue
wheel speed sensor issue
pump motor
solenoid failure

check the obvious things like wheel speed sensor wiring and the like, but if nothing stands out as a problem you'll need to get the errors out of the BCM with VIDA or a comparable aftermarket scanner.

toxtreme · Post by **toxtreme** » 15 Jun 2016, 13:05

What is the BCM?

Post by **oragex** » 15 Jun 2016, 13:26

One of the things to check with the wheel turned:

: front-right-ABS-ring.jpg (23.81 KiB) Viewed 1551 times

nsjames · Post by **nsjames** » 15 Jun 2016, 13:41

toxtreme wrote:What is the BCM?

brake control module