1999 S70 Replace Ignition Lock Cylinder and will not start

daveruckel · Post by **daveruckel** » 29 Jul 2016, 13:59

We had our ignition lock cylinder lock up. The keys were kind of messed up anyway so we bought a new lock cylinder with keys and antenna ring. Had the battery disconnected for about a week waiting for the parts. When I installed it all seemed to go well then we went to start it. It will turnover but will not start. I replaced the main relay thinking that may have something to do with it.
Any help would be great. We do not have a key-fob so I cannot do the lock and unlock thing I have seen with the fob.
I have checked for engine codes and there are none.
What am I missing???
Please help save the day!!!

Dave R

Post by **bmdubya1198** » 29 Jul 2016, 14:32

Since you have a 1999, your key is chipped. I believe it needs to be programmed to the ignition switch by the Volvo dealer if it's a new ignition.
If it's not programmed, the car won't start.

Post by **Ozark Lee** » 29 Jul 2016, 17:50

^^This.

Any time a new key is introduced to the car, even if it is cut the same, the code from the key (I pray you saved the packaging) package has to be programmed into the system or the immobilizer won't let it run. The bummer is that it is pretty much a dealer only process and the car has to be physically at the dealership to get the programming done.

...Lee

Mark60 · Post by **Mark60** » 08 Oct 2019, 16:26

What would happen if I replaced the lock cylinder with one from a salvage yard

Post by **bmdubya1198** » 08 Oct 2019, 18:22

Mark60 wrote: 08 Oct 2019, 16:26 What would happen if I replaced the lock cylinder with one from a salvage yard

You would need the matching key to that lock cylinder of course, but that transponder wouldn't be compatible with the immobilizer. I'm not sure if the dealer can reprogram a used key, so you'll probably need a new one.

dj_v70 · Post by **dj_v70** » 09 Oct 2019, 05:58

Still have the old key? Cut out the new transponder chip out of key and use old one instead (most just tape them inside steering column).

Mark60 · Post by **Mark60** » 09 Oct 2019, 14:05

I do have the old keys and fob.im waiting for the salvage lock and keys to show up.

Post by **abscate** » 10 Oct 2019, 04:50

You can buy another antenna ring from the junkyard, put the old key in it, and bury it under the dashboard , connected. You might have a two crank start process to get the car to run,but my S70 is in this mode.

Mark60 · Post by **Mark60** » 10 Oct 2019, 09:22

Thanks guys, I'll let you know how it goes when my used lock comes in