2007 v70 BERU ZSE 055 Connectors don't fit on coil packs.

fixer333 · Post by **fixer333** » 10 Oct 2016, 21:01

The previous owner changed two of the coil packs and when removing them to repair the wiring harness. I noticed that the connectors on the new coil packs were not seated fully( the clip on the connector was not locked). I have tried to seat them fully and it is impossible to do so. The new coil packs are BERU ZSE 055 and are listed as a replacement for this car. The car runs fine, but I don't like that they dont fit right. All of the old packs and stock connectors fit fine. Anyone have this happen?

Post by **abscate** » 11 Oct 2016, 03:42

Sounds like a parts tolerance issue or perhaps the connector is not quite deep enough to fully accept the plug. I think I would use a zip tie to serve as the clip function.

Changed title for search

fixer333 · Post by **fixer333** » 11 Oct 2016, 10:21

Thanks ,you are probably right.
Its common with Chinese parts, but these say made in Germany.....probably by way of China hahah.