Clutches pressure plates and flywheels

[polskamafia mjl]

Neither? I'd suggest stock.

+1

[beigg]

Last option might be all stock, but that wouldn't be the fastest/cheapest route in my case. Piecing everything together it's about a $100 difference and pending whom I go thru for it all, it can become long lead times for select items. If I go with aftermarket and mostly non OEM standards, it shortens the lead times 1/2 or greater.

[tryingbe]

Last option might be all stock, but that wouldn't be the fastest/cheapest route in my case. Piecing everything together it's about a $100 difference and pending whom I go thru for it all, it can become long lead times for select items. If I go with aftermarket and mostly non OEM standards, it shortens the lead times 1/2 or greater.

http://forums.turbobricks.com/showthrea ... 0+flywheel

[beigg]

Last option might be all stock, but that wouldn't be the fastest/cheapest route in my case. Piecing everything together it's about a $100 difference and pending whom I go thru for it all, it can become long lead times for select items. If I go with aftermarket and mostly non OEM standards, it shortens the lead times 1/2 or greater.

http://forums.turbobricks.com/showthrea ... 0+flywheel

Thank you for the link.

hopefully they're motivated to sell.

[tryingbe]

$500 minus the hydraulics for everything pulled and you still want them to be motivated?

[beigg]

$500 minus the hydraulics for everything pulled and you still want them to be motivated?

Motivated can relate to many aspects to a for sale ad.

1. Not being lazy in providing information
2. Timely responses
3. Price negotiations based on the item(s) conditions
4.
5.
6.
7.
.
.
.

As I should not need to give the examples, it may provide value to those buying/selling... That's if the need for motivation is seeked.

[greg850r]

I don't see that part listed anywhere Dealer only? Anyone replaced one?

Zero internal manual transmission parts available anywhere. Many people tried, zero succeed finding anything.
Pivot arm and boot you might be able to get from the dealer. Call and find out.

My pivot arm looks ok, turns out the throwout bearing was starting to punch through the pressure plate springs.
I did find one here though.
http://www.tascaparts.com/volvo/850/914 ... lease-fork

So which one is the one you are suggesting for the 1997 850?

Neither? I'd suggest stock.

This is what I'm leaning towards.
https://www.fcpeuro.com/products/volvo- ... -k70110-01
Have not seen flywheel surface yet but I'm hoping to re-use it.

[tryingbe]

I don't see that part listed anywhere Dealer only? Anyone replaced one?

Zero internal manual transmission parts available anywhere. Many people tried, zero succeed finding anything.
Pivot arm and boot you might be able to get from the dealer. Call and find out.

My pivot arm looks ok, turns out the throwout bearing was starting to punch through the pressure plate springs.
I did find one here though.
http://www.tascaparts.com/volvo/850/914 ... lease-fork

So which one is the one you are suggesting for the 1997 850?

Neither? I'd suggest stock.

This is what I'm leaning towards.
https://www.fcpeuro.com/products/volvo- ... -k70110-01
Have not seen flywheel surface yet but I'm hoping to re-use it.

That's an n/a clutch.

http://www.tascaparts.com/oe-volvo/272218

Then, get the throw out bearing you need.

[greg850r]

This is what I'm leaning towards.
https://www.fcpeuro.com/products/volvo- ... -k70110-01
Have not seen flywheel surface yet but I'm hoping to re-use it.[/quote]

That's an n/a clutch.

http://www.tascaparts.com/oe-volvo/272218

Then, get the throw out bearing you need.[/quote]


The GLT sedan I'm working on is not a turbo and the FCP is a Sachs that comes with the throw out bearing and ships free

[polskamafia mjl]

The GLT sedan I'm working on is not a turbo and the FCP is a Sachs that comes with the throw out bearing and shipps free

Ok...But OP is working with a turbo. So the kit you linked to wouldn't work.