Hiya,
I found this article here: https://www.matthewsvolvosite.com/chat/p ... php?t=2557
It's good info for where the speaker wires are, but I'm actually looking to just replace my amp. Anyone have a wiring diagram for the line outs from the preamp to the amp? I'd like to keep the tape deck.
The poster also mentions wire harnesses to adapt an aftermarket stereo, but I've been unable to find any. Crutchfield says they don't exist. If I could just find that, and bypass my amp (which i think is faulty), that would work for me too. but I can do it cheaper if I just stick an amp from the auto parts store in there, assuming I can wire it.
1992 240 wagon need more radio info
This topic is in the MVS Volvo Repair Database »
XC60 T6 Vacuum Pump Rebuild - DIY Steps w/ Photos
-
macinjoshdotcom
- Posts: 3
- Joined: 23 July 2007
- Year and Model:
- Location: Lansing, MI USA
- billofdurham
- MVS Moderator
- Posts: 6507
- Joined: 2 February 2006
- Year and Model: 855, 1995
- Location: Durham, England
- Been thanked: 5 times
Will this help?

Depending on the model of Volvo radio you are replacing you may get the leads from one of these two sellers on eBayUK:
http://stores.ebay.co.uk/Thompsons-LTD
http://stores.ebay.co.uk/KSH-AUDIO-LTD
They both ship worldwide.
Bill.

Depending on the model of Volvo radio you are replacing you may get the leads from one of these two sellers on eBayUK:
http://stores.ebay.co.uk/Thompsons-LTD
http://stores.ebay.co.uk/KSH-AUDIO-LTD
They both ship worldwide.
Bill.
Work was good - retirement is better.
1996 850GLT 2.5 20v Estate Manual.
1995 Peugeot Boxer 2.5Tdi Autosleeper.
Previously:
1984 244DL, Manual, Beige.
1987 744GLE, Manual, Green.
1991 960 3.0 24v, Auto, Silver.
1994 940T Wentworth, Auto, Blue.
1996 850GLT 2.5 20v Estate Manual.
1995 Peugeot Boxer 2.5Tdi Autosleeper.
Previously:
1984 244DL, Manual, Beige.
1987 744GLE, Manual, Green.
1991 960 3.0 24v, Auto, Silver.
1994 940T Wentworth, Auto, Blue.
-
macinjoshdotcom
- Posts: 3
- Joined: 23 July 2007
- Year and Model:
- Location: Lansing, MI USA
That kinda helps. I mean, it shows me what's what, but I can't understand how it works.
I'm looking for a conventional preamp/amp relationship here that I don't see. I see a radio, and I see two GND wires from that radio connecting to an amp, power to the amp, and speakers out from the amp.
I don't see where the line level audio signal is, the source that is being amplified. Help?
I'm looking for a conventional preamp/amp relationship here that I don't see. I see a radio, and I see two GND wires from that radio connecting to an amp, power to the amp, and speakers out from the amp.
I don't see where the line level audio signal is, the source that is being amplified. Help?
-- josh
'92 240 Wagon
'92 240 Wagon
-
- Similar Topics
- Replies
- Views
- Last post
-
- 7 Replies
- 526 Views
-
Last post by RickHaleParker
-
- 0 Replies
- 1121 Views
-
Last post by s10lowrider1994






