2004 XC90 2.9 PCV Service
-
xyourobob
- Posts: 59
- Joined: 7 October 2016
- Year and Model: 2004 XC90, 2011 XC60
- Location: Maryland, USA
- Been thanked: 4 times
2004 XC90 2.9 PCV Service
I am getting ready to service the PCV system on my 2004 XC90 T6 2.9 however all the write ups I see are for the 2.5 engine. Is the procedure identical for the 2.9? If not can someone point me to the link that describes this procedure. Thanks!
-
ggleavitt
- Posts: 743
- Joined: 4 June 2006
- Year and Model: 06,08 XC90 V8
- Location: Camano
- Has thanked: 23 times
- Been thanked: 126 times
**Correction- was responding to T-belt, not PCV**. Lemme see if a PCV for a T6 procedure exists (doh).
Looks very much the same as the 2.5T from the front (plus or minus some hose routing for the overly expensive water cooled hose with the banjo bolts). From what I can tell my looking around, I would not hesitate to do this job based on having successfully completed it on a 5-cylinder. For sure I would take a ton of photos before and during disassembly.
Apologies for not taking time to read the initial post.
Looks very much the same as the 2.5T from the front (plus or minus some hose routing for the overly expensive water cooled hose with the banjo bolts). From what I can tell my looking around, I would not hesitate to do this job based on having successfully completed it on a 5-cylinder. For sure I would take a ton of photos before and during disassembly.
Apologies for not taking time to read the initial post.
2006 V8 Ocean Race #740/800 200k, 2008 V8 Sport 183k
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 1126 Views
-
Last post by SuperHerman
-
- 11 Replies
- 2975 Views
-
Last post by abscate