Water on AT, should Flush entire? Topic is solved

[Lutchoj]

Hi guys, just to keep this for future reference for someone who encounter ther same problem.

I drained the fluid and then added what i drained, then i flush it liter, by liter until I start flusing the new fluid. Aparentely there were no more whater in the system, but just to be sure, in a few weeks I'm gonna drain again, assuming that the whater who might have stayed in the transmission will be down because of her density and polarity in relation to the oil. Used 10 liters of atf mercon III, the last 2 was to niveling.

The cooling system was washed with water and coolant 2x, im gonna do one more cause theres a little oil in there (can be seen on the reservatory, above the whater).

Thaks to wveryone who answered.