Replaced recently (4k miles ago) with Zimmerman rotors and Akebono pads. Noise has pretty much been there since ~100 miles after I did the work. I've pulled the wheels off and re-lubed everything (every point that the pad comes in contact with the caliper) twice. Still squeaks!
Is this similar to the well-known issue with the previous generation (850 and V/X/XC70s), where the front edge of the pad makes contact first and causes the squeak (repairable with some shims)?
Just don't want to go and replace them again. Also don't want to wait 20k miles with the squeak
Any help/advice is greatly appreciated. Heckling is fun too






