Cmp & distributor rotor positioning on re-assembly? 850 Topic is solved

SinusoidalTendencies · Post by **SinusoidalTendencies** » 15 May 2017, 03:09

I'm towards the end of a head gasket replacement on a 97 850 glt, and i've taken so long to do it that i don't remember how to position my distributor rotor and cam position sensor rotor on the back of my cams. haven't had any luck searching for assembly info online that will tell me what orientation they should be in at top dead center.

Only two choices really.

And only 2 days left to finish before the unthinkable.......go team go

Post by **rspi** » 15 May 2017, 04:10

They can only go on one way.

Post by **rspi** » 15 May 2017, 04:13

SinusoidalTendencies · Post by **SinusoidalTendencies** » 15 May 2017, 12:03

my bad. was pretty late. exhaustion and fatigue where getting the best of me

Post by **erikv11** » 15 May 2017, 14:41

Go team go!

SinusoidalTendencies · Post by **SinusoidalTendencies** » 17 May 2017, 02:23

Lol...Now it won't start....but that's in a different post