Hello, I want to drill two small holes in the areas where my fingers are in this photo. I plan to hang a hook there that will be held in place with two small (1/8” shank max) screws that would probably only need to go in about max 1/2”
I pulled the radio and it doesn’t like anything is there, but I’m not sure about the area with the vinyl upholstery. Anyone care to chime in?
Safe to drill here?
-
SonicAdventure
- Posts: 442
- Joined: 03 Jul 2015, 09:43
- Year and Model: 1996 850 wagon
- Location: America
- Has thanked: 59 times
- Been thanked: 12 times
- Attachments
-
-
abscate
- MVS Moderator
- Posts: 36137
- Joined: 17 Feb 2013, 17:54
- Year and Model: 99: V70s S70s,05 V70
- Location: Port Jefferson Long Island NY
- Has thanked: 1609 times
- Been thanked: 4063 times
As long as you keep it upside down like the picture you will be fine, otherwise your henways will fall out.
(there is just padding there, no wires, certainly)
(there is just padding there, no wires, certainly)
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread
-
erikv11
- Posts: 11910
- Joined: 25 Jul 2009, 14:03
- Year and Model: 850, V70, S60R, XC70
- Location: Iowa
- Has thanked: 311 times
- Been thanked: 817 times
You can pull the climate unit once the radio is out, and inspect behind the vinyl area. Wear gloves, there are sharp surfaces in there and some people have been badly cut up.
'95 854 T-5R, Motronic 4.4, 185k
'98 V70, T5 tune-injectors-turbo, LPT engine, 304k, daily driver
'06 S60 R, 201k
'07 XC70, black, 205k
'07 XC70, willow green, 223k
gone: '96 NA 850 210k, '98 NA V70 182k, '98 S70 NA 225k, '96 855 NA 169k
'98 V70, T5 tune-injectors-turbo, LPT engine, 304k, daily driver
'06 S60 R, 201k
'07 XC70, black, 205k
'07 XC70, willow green, 223k
gone: '96 NA 850 210k, '98 NA V70 182k, '98 S70 NA 225k, '96 855 NA 169k
-
scot850
- Posts: 15482
- Joined: 05 Apr 2010, 14:46
- Year and Model: 2000 V70 R
- Location: Calgary, Alberta, Canada
- Has thanked: 2196 times
- Been thanked: 1850 times
You will get a better view by pulling the glove box liner out. There are no wires that I can think of behind there. I have a 98 lower dash but not sure how accessible it is for pictures.
Neil.
Neil.
2006 V70 2.5T AWD Polestar tune
2000 V70 R - still being an endless PITA
2006 XC70 - Our son now has this and still parked in our garage
2003 Toyota 4Runner V8 Limited
2015 Kia Sportage EX-L - Sold
1993 850 GLT -Sold
1998 V70 XC - Sold
1997 Volvo 850 SE NA - Went to niece in California - Sold
2000 V70 SE NA - Sold
2000 V70 R - still being an endless PITA
2006 XC70 - Our son now has this and still parked in our garage
2003 Toyota 4Runner V8 Limited
2015 Kia Sportage EX-L - Sold
1993 850 GLT -Sold
1998 V70 XC - Sold
1997 Volvo 850 SE NA - Went to niece in California - Sold
2000 V70 SE NA - Sold
-
wizechatmgr
- Posts: 1800
- Joined: 12 Jan 2017, 13:07
- Year and Model: 1999 V70 XC AWD 2.4T
- Location: Albany, NY area
- Has thanked: 45 times
- Been thanked: 128 times
- Contact:
Should be fine as long as no one ran the CB radio's wires directly behind there...
Don't those work better with the microphone attached?
Don't those work better with the microphone attached?
Wisdom requires knowledge as a prerequisite, but knowledge can be developed due to a lack of wisdom.
In order to learn how to fix something, you must first learn how to break it.
1999 V70 XC AWD 2.4 T -- ~231k miles
1998 V70 2.4 NA -- ~184k miles
In order to learn how to fix something, you must first learn how to break it.
1999 V70 XC AWD 2.4 T -- ~231k miles
1998 V70 2.4 NA -- ~184k miles
-
v-45magna
- Posts: 57
- Joined: 15 Oct 2013, 13:18
- Year and Model: 99 S70 GLT
- Location: DFW
- Has thanked: 2 times
There are a couple of thin harnesses that route above and below the glove box but there is essentially nothing in there. I have a pretty good pic of the back of that area from when I had the dash out. If you want it, I can send it to you. I'm still shopping online photohosts after the great photobucket debacle of 2017.
If I just HAD to, I would pull the climate module to access the back and make some kind of backing to screw into (or better just through) and mount it with screws, nuts and lock washers. But I think that just screwing into it will eventually tear the screw out, maybe crack the underlying (and biodegrading) ABS, and likely look pretty bad after all that happens. What do you want to hang here, a mike? Even if it's a mount for a sat radio, phone, GPS or something, I'd highly recommend a Panavise mount made for the car. They screw into the radio sleeve and comes out next to the radio right where your hand is in the picture, with lots of predrilled holes. I have one, bought at Amazon, very high quality. Even if completely stripped out, the radio chassis braces it and would still hold it in place. YMMV of course. Panavise #75139-196 In Dash Mount for 98-00 Volvo S70.
If I just HAD to, I would pull the climate module to access the back and make some kind of backing to screw into (or better just through) and mount it with screws, nuts and lock washers. But I think that just screwing into it will eventually tear the screw out, maybe crack the underlying (and biodegrading) ABS, and likely look pretty bad after all that happens. What do you want to hang here, a mike? Even if it's a mount for a sat radio, phone, GPS or something, I'd highly recommend a Panavise mount made for the car. They screw into the radio sleeve and comes out next to the radio right where your hand is in the picture, with lots of predrilled holes. I have one, bought at Amazon, very high quality. Even if completely stripped out, the radio chassis braces it and would still hold it in place. YMMV of course. Panavise #75139-196 In Dash Mount for 98-00 Volvo S70.
-
- Similar Topics
- Replies
- Views
- Last post