IPD sale XeMODeX - Experts in Volvo Electronics
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy anything with this and it helps MVS!

B5254T12 vs B5254T4

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" platform cars.

2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R

neven22
Posts: 1
Joined: Sat Nov 18, 2017 11:54 pm
Year and Model: 2006 S60R
Location: Canada
Has thanked: 0
Been thanked: 0
Canada
neven22

B5254T12 vs B5254T4

Post by neven22 » Sun Nov 19, 2017 12:04 am

Guys my 2006 S60R, in need of the engine ,, connecting rod issue. its hard to find replacement engine around me ... One of my friend has engine from 2016 Xc60 with low km... Is it possible to use block from B5254T12 and my cylinder head. Any help is welcome ..

This is what I found ..

The B5254T12 is a 2.5 L (2,497 cc) straight-five. Bore is 83 mm (3.3 in) and stroke is 92.3 mm (3.6 in) with a compression ratio of 9.5:1. It is turbocharged and intercooled with a power output of 254 PS (187 kW; 251 hp) at 5400 rpm and 360 N•m (266 lb•ft) of torque at 1800–4800 rpm. The TF-80SD is the only transmission available with this engine.

The B5254T4[170] is a 2.5 L (2,522 cc) straight-five. Bore is 83 mm (3.3 in) and stroke is 93.2 mm (3.7 in) with a compression ratio of 8.5:1. It is turbocharged and intercooled and equipped with dual VVT. It produces 300 PS (221 kW; 296 hp) at 5500 rpm with 400 N•m (295 lb•ft) of torque at 2000–5250 rpm with the 6-speed manual transmission[nb 11];[128] 300 PS (221 kW; 296 hp) at 6000 rpm with 350 N•m (258 lb•ft) of torque at 1850–6000 rpm[171] with the 5-speed automatic transmission[nb 12]. Cars with the 6–speed automatic transmission

jimmy57
Posts: 6575
Joined: Fri Nov 12, 2010 9:25 am
Year and Model: 2004 V70R GT, et al
Location: Ponder Texas
Has thanked: 4 times
Been thanked: 237 times
jimmy57

Re: B5254T12 vs B5254T4

Post by jimmy57 » Sun Nov 19, 2017 7:07 am

The T12 has oil filter on front of engine I believe. You can't use the P2 intake with the FOE oil filter. The crankcase vent assembly is part of the FOE oil filter housing. The a/c compressor and alternator locations are different. I think the differences here make this not a great idea. The cracked cylinder engines that don't get fixed would have all your parts for a damaged crank and rods problem.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post