Gear Shift Knob 1994 940 Sedan
-
anothersullivan
- Posts: 5
- Joined: 24 August 2017
- Year and Model: 1994 940
- Location: NY
Gear Shift Knob 1994 940 Sedan
The Gear Shift Knob fell apart (plastic and spring broke). It had long been cut from overdrive button and functions to shift gears. (Car is automatic). I ordered an exact same part #6843471 and have not been able to fit it on so that it presses the pin when lever is pulled back. Any solutions? I figured since I wasn't connected to overdrive with the other knob (really same exact piece of plastic) it wouldn't be a problem, but something is obviously not working. Thanks for tips.
-
RickHaleParker
- Posts: 7129
- Joined: 25 May 2015
- Year and Model: See Signature below.
- Location: Kansas
- Has thanked: 8 times
- Been thanked: 958 times
Pull it back off. With a paper towel put a light coat of oil on the shaft. Reinstall the knob. Smack the top to set it all the way down. Clean up any excess oil.
⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
-
anothersullivan
- Posts: 5
- Joined: 24 August 2017
- Year and Model: 1994 940
- Location: NY
Thank you! More force than I expected. Happy to have a knob again.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 1233 Views
-
Last post by anothersullivan
-
- 1 Replies
- 760 Views
-
Last post by kilnsea