1999 V70 AWD Front differential (Bevel/Angle gear) shims/spacers

Bamseclub · Post by **Bamseclub** » 14 Jan 2018, 12:04

Hi!

I had problems with my bevel gear and had it removed to inspect what was the matter with it. I came to the conclusion that the bearings needed to be replaced and so I ordered ones that fit (Koyo). Now I have a problem because I can´t use the original spacers that come between the bearings and the outer box itself because I can´t find it due to a fire in a storage that the parts were kept. Now I´m looking for a set of new shims/spacers or the diameters of ones that fit to have them made.

Here´s a photo of same shim that is needed:

http://photobucket.com/gallery/user/rus ... cGc=/?ref=

Cars VIN is YV1LW56K3Y2695226 if that helps.

Post by **jimmy57** » 14 Jan 2018, 14:03

I have a number of Volvo axle and trans shims. I have them in a drawer and no part numbers on them. If you can provide diameter and the thickness you need I may be able to help.

Bamseclub · Post by **Bamseclub** » 15 Jan 2018, 00:27

Outer diameter of the shim is something close to 61mm (2.4inch), because the bearing is 62mm in diameter and the plate should be little smaller to fit it. Thickness is a bit smaller than 2mm (0.078inch). If you could find something similar to that it would be awesome, thanks!