Login Register

pins for fuel door bracket oops!

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive P2 platform cars sold as model years 2001-2007 (North American market year designations).

2001 - 2007 V70
2001 - 2004 V70 XC (Cross Country)
2004 - 2007 XC70 (Cross Country)
2001 - 2009 S60
2003 - 2007 S60 R
2004 - 2007 V70 R

Post Reply
volvomadness
Posts: 143
Joined: 2 September 2009
Year and Model: v70 2003
Location: new york
Been thanked: 9 times

pins for fuel door bracket oops!

Post by volvomadness »

Had the fuel door bracket on a table with the pins. The table was cleaned off and pins are no where in sight. Has anyone found a place or way I can replace them. Home Depot? or other

User avatar
RickHaleParker
Posts: 7129
Joined: 25 May 2015
Year and Model: See Signature below.
Location: Kansas
Has thanked: 8 times
Been thanked: 958 times

Post by RickHaleParker »

Unless somebody got real bored, I doubt anybody took the time to locate replacement pins. The fuel door hinge assembly is $6.00 on Ebay. If I was in your shoes and need it done today, I would locate nails the right diameter then cut pins out of the nails.
⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.

kcb203
Posts: 7
Joined: 5 August 2013
Year and Model: 2005 XC70
Location: Virginia

Post by kcb203 »

Can you pull the used pins out of the old bracket? I did that for one of the four when I replaced mine because I was missing one.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post