Login Register

Buying a used xc90. Are there model years to avoid?

Post Reply
User avatar
MISSYGO98
Posts: 4
Joined: 18 Mar 2008, 22:35
Year and Model:
Location: charlottesville, va,usa

Post by MISSYGO98 »

Will I be as happy with the 3.2 as I've been with the 2.5!?
Would I want something bigger than 2.5t as it's an SUV?
I love my 850 wagon. It's a Hot Soccor MOM Car!

dcbunger
Posts: 1
Joined: 30 Jan 2018, 12:32
Year and Model: 1990 XC90 i6
Location: MS

Post by dcbunger »

I'm looking at a 1990 XC90 i6 with 129,000 miles. Anything I should be aware of? This would be my first Volvo.

User avatar
matthew1  
Site Admin
Posts: 14799
Joined: 14 Sep 2002, 11:03
Year and Model: 850 T5, 1997
Location: Denver, Colorado, US
Has thanked: 2854 times
Been thanked: 1332 times
Contact:

Post by matthew1 »

Welcome to MVS, DC. You're looking at a XC90 T6, yes? The year is way off.
Help keep MVS on the web -> click sponsors' links here on MVS when you buy from them.

Also -> Amazon link
. Click that when you go to buy something on Amazon and MVS gets a cut!

1998 V70, no dash lights on

1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace

2004 V70 R [gone]

How to Thank someone for their post

Image

User avatar
RickHaleParker
Posts: 7195
Joined: 25 May 2015, 14:30
Year and Model: See Signature below.
Location: Kansas
Has thanked: 8 times
Been thanked: 977 times

Post by RickHaleParker »

"I'm looking at a 1990 XC90 i6"

Volvo XC90 2002–Present
Active
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )

User avatar
mrbrian200
Posts: 1554
Joined: 20 Jan 2016, 08:47
Year and Model: 2006 S60 2.5T FWD
Location: Northern Indiana/Chicago
Has thanked: 7 times
Been thanked: 84 times

Post by mrbrian200 »

What year did Volvo harden the steel used for the AWD angle gears? Or does that not apply to the XC90s? If it does, you're less likely to have trouble with the AWD system with a later model year after around 2004-2005. But I might be wrong if the gears were already updated when the XC90 was introduced for MY2003.

Sadly the Volvo T6 was a very good engine. The GM made transmission paired in that configuration self destructs. All other drivetrain variants use the Asin AW transmission. It's not the engine's fault. If it weren't for that transmission the T6's would probably be highly sought after.

General motors seemed to make a bunch of dud automatics during that era. Cousin had an 04 or 05 Lesabre that the transmission went kerplunkt at about 90,000 miles. Likely a variant of the same gearbox.

User avatar
SuperHerman
Posts: 1798
Joined: 01 Dec 2014, 13:28
Year and Model: 2004 & 2016 XC90
Location: Minnesota
Been thanked: 207 times

Post by SuperHerman »

The question is not so simple. The XC90 was in production for over a decade. Over that period of time numerous changes were made to both the engines, transmissions, electronics and related safety features.

A fully loaded 2003 differs significantly from a fully loaded 2014 - not just in price.

That said the 2003-2005 2.9T with the GM 4T65E transmission will be the cheapest because the transmission has issues. They can be repaired and I have seen listings for some with over 250k.

The 2.5T with the AW55/50 transmission, although a lower model, has a superior resale value as this set up has proven to be more durable and robust plus more economical on gas.

The early V8 models are not highly sought after because of an engine bearing issue. The later models also are not favorites because they cost more to maintain and have poor gas mileage (as do all V8s).

XC90s with the 3.2 and AW transmissions are usually the best bet.

All XC90s are hard on suspensions and tires.

Budget and mechanical ability - as well as clearly knowing the past service history in light of the above listed factors - is important.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post