Login Register

Buy or run away? S80 first gear slips

Post Reply
850TurboTurtle
Posts: 289
Joined: 02 Aug 2011, 21:52
Year and Model: 96 850T, 05 S80T6
Location: Tacoma WA
Has thanked: 12 times
Been thanked: 5 times

Post by 850TurboTurtle »

So it's an 06 S80 non turbo, immaculate, for $1000. But first gear is slipping pretty noticeably. All other gears solid. 32mpg at level freeway cruise.

Is this likely to be a very difficult fix, or something you can drop the tranny pan and swap out some parts?

Asking for a friend (yah, right!)

What would make only gear 1 slip badly?

850TurboTurtle
Posts: 289
Joined: 02 Aug 2011, 21:52
Year and Model: 96 850T, 05 S80T6
Location: Tacoma WA
Has thanked: 12 times
Been thanked: 5 times

Post by 850TurboTurtle »

It shuddered too much when starting in second, and wouldn't engage at all in drive from a stop. Sounded like too much bad news in there.

User avatar
SuperHerman
Posts: 1798
Joined: 01 Dec 2014, 13:28
Year and Model: 2004 & 2016 XC90
Location: Minnesota
Been thanked: 207 times

Post by SuperHerman »

I saw you "ran away" but I will give you my thoughts. If it has the GM 4t65E transmission figure $300 in parts and fluids to do an in car rebuild of the transmission. Basically you are buying a full transmission rebuild kit and replacing all the clutches, steels, gaskets and o-rings.

It is not difficult - numerous videos on Impala in car rebuilds. Just support the engine, lower the subframe - remove the CV and related on the left, disconnect the same on the right, lower the driver side of engine so that the valve body cover has room to clear and dig in. Scare factor rates a 10, actual work more like a 6-7.

If you search you will some guys that have done a tranny rebuild on the AWD versions - the FWD is the same for what one would do in car.

If you have VIDA look at the service procedure to do a valve body and you will get the idea.

850TurboTurtle
Posts: 289
Joined: 02 Aug 2011, 21:52
Year and Model: 96 850T, 05 S80T6
Location: Tacoma WA
Has thanked: 12 times
Been thanked: 5 times

Post by 850TurboTurtle »

That's awesome info. But it also had mildew damage, odd interior smells, and heater core issues: too many unknowns for me.

But I'll be a little less afraid of any other tranny's given your input! Thanks.

User avatar
RickHaleParker
Posts: 7195
Joined: 25 May 2015, 14:30
Year and Model: See Signature below.
Location: Kansas
Has thanked: 8 times
Been thanked: 977 times

Post by RickHaleParker »

But it also had mildew damage, odd interior smells

Tell tell signs of flood damage.
Active
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )

User avatar
matthew1  
Site Admin
Posts: 14799
Joined: 14 Sep 2002, 11:03
Year and Model: 850 T5, 1997
Location: Denver, Colorado, US
Has thanked: 2854 times
Been thanked: 1332 times
Contact:

Post by matthew1 »

RickHaleParker wrote: 31 Jan 2018, 16:05 But it also had mildew damage, odd interior smells

Tell tell signs of flood damage.
Yes
Help keep MVS on the web -> click sponsors' links here on MVS when you buy from them.

Also -> Amazon link
. Click that when you go to buy something on Amazon and MVS gets a cut!

1998 V70, no dash lights on

1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace

2004 V70 R [gone]

How to Thank someone for their post

Image

Post Reply
  • Similar Topics
    Replies
    Views
    Last post