Toubleshoot why ac is putting out 140 degree air
- RickHaleParker
- Posts: 7195
- Joined: 25 May 2015, 14:30
- Year and Model: See Signature below.
- Location: Kansas
- Has thanked: 8 times
- Been thanked: 977 times
The blend door is not working for some reason. The heater runs all the time, temperature is regulated by blending hot and cold air. Start the diagnostic by scanning for CCM (Climate Control Module ) for error codes.
Active
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )
- oragex
- Posts: 5347
- Joined: 24 May 2013, 06:20
- Year and Model: S60 2003
- Location: Canada
- Has thanked: 102 times
- Been thanked: 352 times
- Contact:
Start first by carefully touching the return line of the A/C inside the engine bay, see if it feels cold with condensation on it
Also look at the clutch plate, does it look like it's turning along with the compressor pulley?
Also look at the clutch plate, does it look like it's turning along with the compressor pulley?
Several Volvo Repair Videos https://www.youtube.com/playlist?list=P ... s0FSVSOT_c
-
- Similar Topics
- Replies
- Views
- Last post
-
- 7 Replies
- 1720 Views
-
Last post by abscate
-
- 1 Replies
- 890 Views
-
Last post by bugeye
-
- 2 Replies
- 798 Views
-
Last post by m96ag
-
- 3 Replies
- 440 Views
-
Last post by precisionguesswork
-
- 0 Replies
- 826 Views
-
Last post by Cecil_






