2000 V70R
I though a clunk on the driver side front end was the inner tie rod. When I went in to change out the inner tie rod I found that my rack is clunking when i put upwards and downward pressure on it. The inner tie rod feels very tight along with the outer. I took a video of the clunk. You wouldn't mind verifying what I'm 99% sure of?
Also what are my options, could I rebuild the rack? Or am I better off replacing it? If so what are the favorite places to grab a good quality rack from?
Here is the video I took of the clunk I'm hearing
[youtube][/youtube]
Before I buy a new rack, you wouldn't mind verifying the problem?
-
Clemens
- Posts: 1954
- Joined: 03 Sep 2015, 12:34
- Year and Model: 96 855 R + 94 855 T5
- Location: Austria
- Has thanked: 498 times
- Been thanked: 228 times
i can try tomorrow morning on my 96.
1996 855 R,
black on black, M56 swapped, Quaife, TME 2.5 exhaust, 17 inch Volants
2010 V70 D5,
Saville Gray on tan leather, 18 inch Odysseus
black on black, M56 swapped, Quaife, TME 2.5 exhaust, 17 inch Volants
2010 V70 D5,
Saville Gray on tan leather, 18 inch Odysseus
-
erikv11
- Posts: 11911
- Joined: 25 Jul 2009, 14:03
- Year and Model: 850, V70, S60R, XC70
- Location: Iowa
- Has thanked: 311 times
- Been thanked: 817 times
Jorgen automotive, but source your own inner tie rods.Tumbler wrote: 21 Sep 2018, 11:37 ... Also what are my options, could I rebuild the rack? Or am I better off replacing it? If so what are the favorite places to grab a good quality rack from? ...
'95 854 T-5R, Motronic 4.4, 185k
'98 V70, T5 tune-injectors-turbo, LPT engine, 304k, daily driver
'06 S60 R, 201k
'07 XC70, black, 205k
'07 XC70, willow green, 223k
gone: '96 NA 850 210k, '98 NA V70 182k, '98 S70 NA 225k, '96 855 NA 169k
'98 V70, T5 tune-injectors-turbo, LPT engine, 304k, daily driver
'06 S60 R, 201k
'07 XC70, black, 205k
'07 XC70, willow green, 223k
gone: '96 NA 850 210k, '98 NA V70 182k, '98 S70 NA 225k, '96 855 NA 169k
-
rguzz
- Posts: 596
- Joined: 07 Oct 2015, 08:41
- Year and Model: 1996 850 turbo
- Location: VA
- Been thanked: 25 times
Disclaimer: I know nothing about what I'm about to say but is everyone convinced that your noise is rack related? If that is the opinion, explain to me so I understand. Rack replacement is not cheap nor for the faint of heart if you tackle it yourself.
-
Tumbler
- Posts: 12
- Joined: 21 Sep 2013, 13:05
- Year and Model: 2000 V70R
- Location: Tacoma,WA
- Has thanked: 4 times
- Been thanked: 1 time
I feel it is rack related due to the video. When you watch it take note of the sound the rack is making when I apply force to the pinion. It should not be making any noise or having the amount of play in it that it does.rguzz wrote: 22 Sep 2018, 08:26 Disclaimer: I know nothing about what I'm about to say but is everyone convinced that your noise is rack related? If that is the opinion, explain to me so I understand. Rack replacement is not cheap nor for the faint of heart if you tackle it yourself.
2000 V70R
-
Clemens
- Posts: 1954
- Joined: 03 Sep 2015, 12:34
- Year and Model: 96 855 R + 94 855 T5
- Location: Austria
- Has thanked: 498 times
- Been thanked: 228 times
my rack won't make that noise, btw.
1996 855 R,
black on black, M56 swapped, Quaife, TME 2.5 exhaust, 17 inch Volants
2010 V70 D5,
Saville Gray on tan leather, 18 inch Odysseus
black on black, M56 swapped, Quaife, TME 2.5 exhaust, 17 inch Volants
2010 V70 D5,
Saville Gray on tan leather, 18 inch Odysseus
-
- Similar Topics
- Replies
- Views
- Last post