SRS light after dashboard repair

Post by **abscate** » 05 Oct 2018, 02:19

My scanner reported “ function is not supported at the moment” so it was definitely a scanner issue. Works on the 99 And 2005 for SRS resetFINE.

jmaggioc · Post by **jmaggioc** » 05 Oct 2018, 14:13

I unfortunately disconnected the drivers side airbag before disconnecting the battery. When I reassembled, I got the light. I did not disconnect the horn contact ring at all (clock spring?)

Post by **scot850** » 05 Oct 2018, 23:21

So did you just remove the upper section the dash? If so, I'd still check the seating and the wiring of the passenger airbag. It is possible to damage it during re-assembly. But do check AFTER disconnecting the battery first and waiting about 30 minutes.

Neil.

Post by **abscate** » 06 Oct 2018, 02:40

Too late, the deed is done. We are trying to findJ some in the Big Apple who can reset his SRS

SRS light after dashboard repair

Re: SRS light after dashboard repair