I got to try an '08 S60 with the 2.5T motor, automatic.
When checking the car's log with VIDA, it got a load of errors on the "Initial State" screen.
The first three are actually yellow, the rest seem to have a Good (green) status for the "Current operation cycle", when the "Previous operation cycles" are red. CEM-8A32 is probably due to one front Xenon happens to be blown.
Can some of these be false positives or is there no such thing for these modules?
About the first three: all of them have a Yellow status with <30% disturbance for "Current operation cycle" and "Previous operation cycles" have Red statuses with a Low frequency (<33%). The most important one of them are probably the ones with ECM. The people who were selling the car were more than welcome to change the affected camshaft sensor(s). There was no "Check engine" light up on the dash. Can this affect overall performance, as driving it was fine?
Driving the car was actually pretty good, everything worked just fine, no out-of-the-usual quirks, but noticed the acceleration to be a bit "lagged" when giving full blast, if you get what I mean. FYI the road was a bit wet, not raining but maybe enough to kick in the trac control - is this hypothesis correct? I remember how an S60 R manual drove with good instant boost, but just wanted to know if this is normal for this car.
ALSO, the av. fuel consumption was 19.5 l/100km, that's about 12mpg for US. That's 100% city driving and the car has about 1000km of test drives during the time it has been on sale. Is that particularly high or that is not enough data for it to be analysed to be a high fuel consumption? Seen that particular car get less, probably 9-12 l/100km. I forgot to check the instantanious consumption, oops...
Any feedback is appreciated, most of the info is still probably on my computer so I can check for something I might have forgotten to. I don't have the car yet so.. have to work with what I have






