Login Register

2002 Volvo s60 T5 Misfire, camshaft position sensor, mass airflow sensor

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive P2 platform cars sold as model years 2001-2007 (North American market year designations).

2001 - 2007 V70
2001 - 2004 V70 XC (Cross Country)
2004 - 2007 XC70 (Cross Country)
2001 - 2009 S60
2003 - 2007 S60 R
2004 - 2007 V70 R

Post Reply
Luzanov345
Posts: 2
Joined: 11 October 2018
Year and Model: 2002 S60 T5
Location: Washington

2002 Volvo s60 T5 Misfire, camshaft position sensor, mass airflow sensor

Post by Luzanov345 »

Hi everybody. I don't understand what happened. Sorry if I couldn't explain it properly.
So, I had replaced a Camshaft Exhaust Solenoid (it was my fault that it broke down). Due to a bad solenoid I had misfires, the timing belt was ruined.
So I got all of that replaced, put in new coils, new timing belt with all the tensioners, new water pump. So after replacing all of this, the car is running nice and smooth, no problem for about 2 weeks.
Now the Check Engine light goes on again, i got it checked and it shows random misfire on all of the cylinders, camshaft position sensor, and mass airflow sensor.
But the car is still running just fine. I don't feel no misfire, no shaking or idle. Nothing change with the driving.
Why am I getting all these codes and a Check Engine light?

User avatar
RickHaleParker
Posts: 7129
Joined: 25 May 2015
Year and Model: See Signature below.
Location: Kansas
Has thanked: 8 times
Been thanked: 958 times

Post by RickHaleParker »

P0300 only or P0300 - P0305?

P0300 EFI-543 Misfire from at least 1 cylinder
P0300 EFI-545 Misfire with catalytic converter damage from at least 1 cylinder

P0301 EFI-451 Misfire cylinder 1
P0301 EFI-551 Misfire with catalytic converter damage cylinder 1

P0302 EFI-452 Misfire cylinder 2
P0302 EFI-552 Misfire with catalytic converter damage cylinder 2

P0303 EFI-453 Misfire cylinder 3
P0303 EFI-553 Misfire with catalytic converter damage cylinder 3

P0304 EFI-454 Misfire cylinder 4
P0304 EFI-554 Misfire with catalytic converter damage cylinder 4

P0305 EFI-455 Misfire cylinder 5
P0305 EFI-555 Misfire with catalytic converter damage cylinder 5

Punch it to the floor, does it rev up like it should?
⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.

User avatar
abscate
MVS Moderator
Posts: 35272
Joined: 17 February 2013
Year and Model: 99: V70s S70s,05 V70
Location: Port Jefferson Long Island NY
Has thanked: 1497 times
Been thanked: 3810 times

Post by abscate »

You are chasing multiple problems

A bad cam solenoid won’t usually cause misfires,

How old are the plugs and coils in miles and time?
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread

Luzanov345
Posts: 2
Joined: 11 October 2018
Year and Model: 2002 S60 T5
Location: Washington

Post by Luzanov345 »

I don't think it is a misfire. And Yes, it revs just perfect.
The car is 16 years old, I just replaced the coils, and I'm about to replace the spark plugs.
But that's not the problem. There is no actual misfire. I think its some kind of electrical problem. I think.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post