2003 c70 ignition lock will not turn
-
hightech24
- Posts: 4
- Joined: 29 May 2014, 20:16
- Year and Model: 2003 C70 convert
- Location: new york
- Has thanked: 1 time
have had problem several times when the key is inserted and the key will not turn, have had to reinsert the key several times before it would allow to turn and start the car.
-
dj_v70
- Posts: 240
- Joined: 19 Jul 2014, 13:51
- Year and Model: v70 2003
- Location: ri
- Has thanked: 7 times
- Been thanked: 23 times
This is well documented on this forum, it is the ignition cylinder.
a) If it will turn fine between key positions 0 and 1, then there is a good workaround fix (1 hour labor, no parts)
b) If it won't turn past position 0, you are better off replacing cylinder (part cost $200, 4+ hours labor depending on your luck with security bolts) unless you are willing to go through complete dissassembly and tumbler fix after removing it.
You want to take care of this before it gets worse! I broke down 500 miles away from home. Wife wouldn't drive car after that, had to buy new car and sell that one!!!
a) If it will turn fine between key positions 0 and 1, then there is a good workaround fix (1 hour labor, no parts)
b) If it won't turn past position 0, you are better off replacing cylinder (part cost $200, 4+ hours labor depending on your luck with security bolts) unless you are willing to go through complete dissassembly and tumbler fix after removing it.
You want to take care of this before it gets worse! I broke down 500 miles away from home. Wife wouldn't drive car after that, had to buy new car and sell that one!!!
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 1831 Views
-
Last post by ggleavitt
-
- 22 Replies
- 1961 Views
-
Last post by volvolugnut
-
- 7 Replies
- 879 Views
-
Last post by Krons
-
- 0 Replies
- 1486 Views
-
Last post by joevar
-
- 8 Replies
- 2885 Views
-
Last post by Mark60






