Vida 2014D Times out 12/31/2017 23:59 Topic is solved

Post by **RickHaleParker** » 27 Jan 2019, 13:34

jkelley1083 wrote: 27 Jan 2019, 13:15 Yes and yes. All tests pass except Interface test. Says that “Self diagnostic connector is not attached”.

.NET Framework 3.5 installed?

: 2019-01-27 (1).png (33.6 KiB) Viewed 1970 times

jkelley1083 · Post by **jkelley1083** » 27 Jan 2019, 14:29

RickHaleParker wrote: 27 Jan 2019, 13:34
jkelley1083 wrote: 27 Jan 2019, 13:15 Yes and yes. All tests pass except Interface test. Says that “Self diagnostic connector is not attached”.
.NET Framework 3.5 installed?

2019-01-27 (1).png

Yes. Same exact setup as yours.

Post by **RickHaleParker** » 27 Jan 2019, 15:25

jkelley: Rerun the install process over the current install. That has fixed this problem in the past.

jkelley1083 · Post by **jkelley1083** » 27 Jan 2019, 18:12

RickHaleParker wrote: 27 Jan 2019, 15:25 jkelley: Rerun the install process over the current install. That has fixed this problem in the past.

I followed this advice and it screwed my stuff all up. It doesn’t “just work”. I used another method and it worked fine except for auto-detecting my DiCE. I followed your Installation instructions again for the repack and now VIDA won’t load anymore. Looks like I’ll have to erase everything and start from scratch..

Post by **RickHaleParker** » 28 Jan 2019, 06:27

You won't be the first that had to wipe clean and start over. That a Windows / IBM clone thing, they are all different hardware and software entities. Persecute it, your find your PC's demons.

Post by **xHeart** » 28 Jan 2019, 07:10

RickHaleParker wrote: 28 Jan 2019, 06:27 You won't be the first that had to wipe clean and start over. That a Windows / IBM clone thing, they are all different hardware and software entities. Persecute it, your find your PC's demons.

+1

VIDA/DiCE is not a normal set up. I use Firefox due to its awareness and developer tools to find my way with newer installation. However, jkelley's frustration is right on with us DIYers. If I can turn it around anyone can.

Dr. Parker your patience is appreciated, don't know jkelley's set up, suspecting port 80 is in use.

jkelley1083 · Post by **jkelley1083** » 28 Jan 2019, 07:55

This is where I found the resolution to the black X problem I was having. If I had only found it before reinstalling over everything...

https://forums.swedespeed.com/showthrea ... 41?page=14

This method works PERFECTLY after downloading RickHaleParker’s repack and the 2099 patch

jkelley1083 · Post by **jkelley1083** » 28 Jan 2019, 07:57

TROUBLESHOOTING: PROBLEM: An X is presented in Internet Explorer were the DICE Communication tool selector should be (this happens after a Windows upgrade). SOLUTION: Locate on your VIDA DVD the directory D:\Install\Utils (substitute D: for your actual VIDA DVD location) and the file "EnableIEHostingx64.reg" and merge it with the registry by double clicking on it and then select "Yes" and "OK". For x86 systems do the same with "EnableIEHostingx86.reg"

Post by **xHeart** » 28 Jan 2019, 10:38

jkelley1083 wrote: 28 Jan 2019, 07:55 This is where I found the resolution to the black X problem I was having. If I had only found it before reinstalling over everything...

https://forums.swedespeed.com/showthrea ... 41?page=14

This method works PERFECTLY after downloading RickHaleParker’s repack and the 2099 patch

Thank you for sharing jkelley. The link discusses "To resolve problems with non-detected or problematic DiCE-devices/USB ports...". It speaks to the issues that Rick identified in my Windows 7 Ultimate set up.

Post by **xHeart** » 31 Jan 2019, 11:16

If you dot the i's and cross the t's, then that was a perfect guide!