P3 S60 T5 AWD Engine Part out (2013 S60 AWD T5)

chittychittybangbang · Post by **chittychittybangbang** » 12 Feb 2019, 14:37

I had a compression issue on my car and ended up replacing the motor. I'm tearing down the used motor and have a few components for sale. The motor was at 108K when it experienced the compression loss. I replaced it with a 70K motor. I'm pricing based on what I can find on FCP with a ~50-60% discount. OBO.

Ignition Coils $75 - From 70K motor. I bought new coils initially thinking I had a spark problem, but it was a compression issue.

Turbo and Exhaust Manifold, with integrated boost controller, inlets, and banjos $600 - No shaft play side by side or in and out

Exhaust Shield $10

Throttle Body $350

Cam angle sensor $200

PCV breather with cam hose $150

Injectors $50

Engine Oil Cooler $50

Let me know if there is any interest in other components. I believe there is a valve issue so there is a chance the head is no good. I will turn the block into a side table. I don't have everything photographed, let me know what you might want to see.