Ecc woes- No defrost?

[Kara503]

ECC is throwing a fit on my Platinum Edition.

I don't have time to troubleshoot the system and make it work properly, I just want to manually set it to 'permanent defrost' then deal with it later so I can drive in the humid rainy weather we are having now. I removed the glovebox to find the 'floor/ defrost' damper (#15 in the image below) stuck after removing the motor. I unstuck it but no matter where I set the flap by hand I get anywhere from no air to very little air coming from the defrost vents. I can hear the flap moving around in there making a thud so I know the shaft isnt separated from the flaps. What am I missing? Is there another damper that needs to be moved in conjunction with 15 to give me defrost?

ECC-kleppensteller.jpg (24.74 KiB) Viewed 528 times

Vents are stuck on head level air only. None of the damper motors respond to any commands; the only control I have is hot or cold and fan speed. Already tried several ECC modules- the lights flash and I have the same issue on all of them so I'm fairly certain it is the system itself and not the control module. I have tried multiple times to pull the ECC codes with my home made tool but for some reason I cannot get it to work. I've tried multiple LEDs with different resistors and buttons and such but nothing will even make the LED light and I have no fuses blown so I'm not sure what to do there. It also looks like someone has been inside the dash before.

[abscate]

I think you have the wrong motor Kara, I’ll try to find the diagram to confirm

There are two hot/cool blend doors to set the temp for driver and navigator and I think those are symmetric on the unit.

Stand by for checking...

NOPe, you have it right.. that’s crappy. All I can think of is that’s the flaps have fallen off the shaft which means a tear down. I guess last ditch effort could be a junkyard part for cheap