V70 xc 2.4 turbo wont go over 3000rmp.....gets up to speed just slowly
Re: V70 xc 2.4 turbo wont go over 3000rmp.....gets up to speed just slowly
Flow is good (no cat)and yes sounds like maybe coming from j hose at breather box.....its a loud wissle after I press on peddle starts at like 2500 some as my max rpm at the moment....I may have also found a leak in gas line.....only when pressure builds
- abscate
- MVS Moderator
- Posts: 35275
- Joined: 17 February 2013
- Year and Model: 99: V70s S70s,05 V70
- Location: Port Jefferson Long Island NY
- Has thanked: 1500 times
- Been thanked: 3810 times
The PEMs give up in 10-15 years and will first give you a miss at speed , then no start
You have to diagnose the root cause, not throw parts by symptom. Check fuel pressure with gauge. Monitor while driving
You have to diagnose the root cause, not throw parts by symptom. Check fuel pressure with gauge. Monitor while driving
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread
- wizechatmgr
- Posts: 1798
- Joined: 12 January 2017
- Year and Model: 1999 V70 XC AWD 2.4T
- Location: Albany, NY area
- Has thanked: 45 times
- Been thanked: 126 times
- Contact:
I don't think our year has a PEM. Thought we only had the fuel pump relay.
Wisdom requires knowledge as a prerequisite, but knowledge can be developed due to a lack of wisdom.
In order to learn how to fix something, you must first learn how to break it.
1999 V70 XC AWD 2.4 T -- ~231k miles
1998 V70 2.4 NA -- ~184k miles
In order to learn how to fix something, you must first learn how to break it.
1999 V70 XC AWD 2.4 T -- ~231k miles
1998 V70 2.4 NA -- ~184k miles
Thanks had me boggeled when I googled it....me and my 13 yr. Old have it torn aprt now....found a loos clamp I think comming of breather box....gonna install new I hose comming of brether box.....also some one said there is many things that go qrong with the etm.....i imstalled contactless poilsition sensor on original..no change...so installed a used one and was doing same thing....no change....what are the odds of them both haveing same issue? Wont go over 3000rpm and it gets up to speed and shifts....
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5 Replies
- 2332 Views
-
Last post by RickHaleParker
-
- 1 Replies
- 562 Views
-
Last post by ogatrulle






