Vvt hub o-ring size?

V70xc1999 · Post by **V70xc1999** » 01 May 2019, 20:48

Need to know what size o ri g to get for the vvt hub 1999 volvo v70 xc 2.4 turbo. Have one oreder but a week or more out...couldnt find the specs and need the car untill I can replace with good one when it comes in the mail. Thanks. Its the one on the inside not the cap!!

Post by **abscate** » 02 May 2019, 05:18

I might have an intake VVT UNIT off the car I can check today, not sure of Orings are the same though.

Post by **abscate** » 02 May 2019, 15:12

Measured on an 1999 Intake Cam

Outer Cap Oring 28mm x 1.5mm

Inner VVT hub Oring 50mm x 1.5mm

Also added to the O-ring thread

viewtopic.php?f=1&t=88579&p=505792#p505792