Unable to get Vida into Control Module Adaption

GregAivaliotis · Post by **GregAivaliotis** » 19 May 2019, 17:48

2014D pretty sure

Post by **ggleavitt** » 19 May 2019, 22:45

2011 and 2012 years are missing this menu item in VIDA. The menu does not note what's on the TCM, it's what's configured in VIDA and is a line item that associates to a workflow that will allow you to trigger the adaptation program/process.

If you have a 2011 version of VIDA, select vehicle for 2009 D5244T5. If you have a 2014 version of VIDA,select vehicle for 2013 D5244T18 (menu item has a new name- Control module adaptation).

Edit 052019- too many its

GregAivaliotis · Post by **GregAivaliotis** » 19 May 2019, 23:07

ok thanks, Ill give it a GO , thanks

GregAivaliotis · Post by **GregAivaliotis** » 22 May 2019, 00:47

Got it to work by selecting different options in start memub

GregAivaliotis · Post by **GregAivaliotis** » 22 May 2019, 00:49

Appreciate the help

GregAivaliotis · Post by **GregAivaliotis** » 25 Mar 2020, 21:49

Hi again , just trying this again after some time , and after getting the correct model and model year and engine , click ok , , it won’t then allow me to connect to dice as no VIN

I get the attached message pop up

Post by **precopster** » 26 Mar 2020, 05:20

Enter the VIN in manually then select vehicle options. You can't do any diagnostic work on Vida without pointing to a VIN.

Unable to get Vida into Control Module Adaption

Re: Unable to get Vida into Control Module Adaption