Front Right side noise after wheel hub replacement OBQ SKF BEARING!) Topic is solved

Post by **Fiodor** » 24 May 2019, 11:14

Hello,

After replacing my wheel hubs on both front wheels I now have a low tone noise coming from the right that turns into a high pitched noise when I take a very hard turn to the left.
Any ideas ?

Thanks for your help !

Post by **erikv11** » 24 May 2019, 11:53

From that description it sounds like a bad hub bearing on the right. What's the bearing source?

Did you check and make sure nothing is stuck, for example behind the brake pads?

Post by **Fiodor** » 24 May 2019, 12:11

It's an SKF bearing.
We didn't find anything behind the brake pads

Post by **erikv11** » 24 May 2019, 12:21

Hmmmm also are you sure the axle is seated all the way in the hub? Though you never know of course, SKF should be good.

Post by **Fiodor** » 24 May 2019, 12:24

I'll check on Monday, I left my car at the mechanic

Post by **xHeart** » 24 May 2019, 13:22

Fiodor wrote: 24 May 2019, 12:24 I'll check on Monday, I left my car at the mechanic

A swap may help diagnose OR clear the issue. Wheel alignment is a good idea.

Post by **Fiodor** » 19 Jun 2019, 14:22

Well it sure took a hell of a time but it eventually got fixed.
It was a bad wheel hub out of the box...

Post by **abscate** » 19 Jun 2019, 21:48

Obq is industry speak for out of box quality