It had rough shifting issues when getting up to temp, so I did multiple fluid flushes (along with a new radiator and flushes due to suspected cooling issues).
Now where I stand is that the car runs and shifts perfectly, with the AC fan running.
If I turn off the AC fan, the temperature rises to a point where the transmission shifts super rough.
Even idling, the engine fan does not come on even when the engine seems hot.
I've tested the fan through VIDA, and it will run at all the test power levels.
However, I did notice while watching it idle, the ECM was attempting to send an 8-9% fan level, and the fan was not running.
That percentage was not available on the Engine Fan test (the lowest being around 16%).
I also notice that my fan does not often run after i shut the car off, even in higher temperatures when I know the engine is very hot.
Any ideas on likely culprits? Coolant temp sensor?






