IPD sale XeMODeX - Experts in Volvo Electronics

Get email notification of topic replies. Log in or register (free). Amazon Link Buy anything with this and it helps MVS!

Wouldn't pass State Inspection

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" platform cars.

2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R

User avatar
matthew1
Site Admin
Posts: 10738
Joined: Sat Sep 14, 2002 11:03 am
Year and Model: 850 T5, 1997
Location: Denver, Colorado, US
Has thanked: 649 times
Been thanked: 273 times

Re: Wouldn't pass State Inspection

Post by matthew1 »

I merged List Of Parts/Name To Verify For Me and Wouldn't Pass State Inspection.
Help keep MVS on the web -> click sponsors' links here on MVS when you buy from them.
Also -> Amazon link
. Click that when you go to buy something on Amazon and MVS gets a kickback.

1997 850 T5, MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace [gone]
2004 V70 R [gone]

Image
XC70Rider
Posts: 412
Joined: Thu Oct 18, 2018 7:09 pm
Year and Model: 2007 XC70
Location: MA
Has thanked: 20 times
Been thanked: 20 times

Re: Wouldn't pass State Inspection

Post by XC70Rider »

The labor cost of pressing in new bushings into the original control arms will be high. If you're not doing the labor yourself then purchase new control arms to save money.

Right lower quality:

https://www.fcpeuro.com/products/volvo- ... e-30635230

Left lower quality:

https://www.fcpeuro.com/products/volvo- ... 0-30635229

Right higher quality:

https://www.fcpeuro.com/products/volvo- ... 30635230oe

Left higher quality:

https://www.fcpeuro.com/products/volvo- ... 30635229oe



You'll want to mount new ball joints on those new control arms

Ball Joint moderate quality x2:

https://www.fcpeuro.com/products/volvo- ... s60-xc70-2

Ball Joint higher qaulity x2:

https://www.fcpeuro.com/products/volvo- ... 0-274548oe
User avatar
E Showell
Posts: 3178
Joined: Thu Oct 16, 2008 4:00 pm
Year and Model: V70R '06 AWD Auto
Location: Long Valley, N.J.
Has thanked: 35 times
Been thanked: 79 times

Re: Wouldn't pass State Inspection

Post by E Showell »

Changing rear brake pads is exceedingly simple. Drive out two pins with a drift, remove pin retaining clip in the process, wiggle out old pads. Compress piston with a big pair of channel locks or large c clamp. Wiggle in new pads and drive in new pins with clip.

Of course, car is on jackstands with rear wheel removed.

Remount rear wheel and bed in new pads. Voila.
'98 V70 NA FWD 5 spd, silver sand metallic (sold)
'99 V70 NA FWD Auto, dark blue (actively for sale)
'99 S70 NA FWD Auto, black (sold and resurrected -- Don't cry for me Argentina . . . )
'07 S80 3.2 FWD Auto, Barents Blue Metallic
'06 V70 R AWD Auto, Sonic Blue Metallic
'04 XC70 Ruby Red Metallic
'95 855 auto (sold)
'86 245 manual (sold)
'05 V70 T5 M (totalled)
'06 V70 FWD Auto (totalled)
Mr. Detail
Posts: 383
Joined: Wed May 03, 2006 11:21 am
Year and Model: 2002 V70 N/A
Location: Newtown Square, Pennsylvania
Has thanked: 24 times
Been thanked: 2 times

Re: Wouldn't pass State Inspection

Post by Mr. Detail »

Chrism, no you don't have that wrong. I can't figure out why the guy I have been going to for years wants to send me elsewhere to a place that would cost be a fortune. Maybe he just doesn't want to deal with my fixes and thinks that because it is a Volvo it has to be done at a Volvo expert shop.
MDK, I do at least have ramps so maybe I cans search up a "YouTube" video for doing what you wrote. I need to borrow or rent an impact wrench just in case I think.
Mr. Detail
Posts: 383
Joined: Wed May 03, 2006 11:21 am
Year and Model: 2002 V70 N/A
Location: Newtown Square, Pennsylvania
Has thanked: 24 times
Been thanked: 2 times

Re: Wouldn't pass State Inspection

Post by Mr. Detail »

Thanks E Showell. I think i will have to go buy a big pair of channel locks or large c clamp. Can I reuse the old retaining clip?
MDK
Posts: 448
Joined: Sun Apr 08, 2018 5:43 pm
Year and Model: 1998 xc 70
Location: Ohio
Been thanked: 28 times

Re: Wouldn't pass State Inspection

Post by MDK »

Well Mr Detail.. MDK here. I guess it's really a question of upper body strength. And your over fitness. I bought the car ramps from tractor supply.. about 40$ back then. High strength plastic. Secondly..I did it all without any air tools. Just make sure it's real tight. I know there are torque specifications, but what's a Newton meter?
User avatar
E Showell
Posts: 3178
Joined: Thu Oct 16, 2008 4:00 pm
Year and Model: V70R '06 AWD Auto
Location: Long Valley, N.J.
Has thanked: 35 times
Been thanked: 79 times

Re: Wouldn't pass State Inspection

Post by E Showell »

I suppose you could reuse the clip, but I generally replace them. Brake hardware kits are cheap -- c. $10-12 and will include the pins and clips for both sides of the car. Don't forget some brake grease to apply to the back side of the pads to avoid squealing.
'98 V70 NA FWD 5 spd, silver sand metallic (sold)
'99 V70 NA FWD Auto, dark blue (actively for sale)
'99 S70 NA FWD Auto, black (sold and resurrected -- Don't cry for me Argentina . . . )
'07 S80 3.2 FWD Auto, Barents Blue Metallic
'06 V70 R AWD Auto, Sonic Blue Metallic
'04 XC70 Ruby Red Metallic
'95 855 auto (sold)
'86 245 manual (sold)
'05 V70 T5 M (totalled)
'06 V70 FWD Auto (totalled)
Mr. Detail
Posts: 383
Joined: Wed May 03, 2006 11:21 am
Year and Model: 2002 V70 N/A
Location: Newtown Square, Pennsylvania
Has thanked: 24 times
Been thanked: 2 times

Re: Wouldn't pass State Inspection

Post by Mr. Detail »

Thanks gentlemen. MDK, which flag is that? Maybe Nike could use that one on their new shoes.
User avatar
abscate
MVS Moderator
Posts: 22516
Joined: Sun Feb 17, 2013 5:54 pm
Year and Model: 99T5 ,99S70,2005V70
Location: NYC, ALBANY NY
Has thanked: 376 times
Been thanked: 1176 times

Re: Wouldn't pass State Inspection

Post by abscate »

Mr. Detail wrote: Tue Jul 09, 2019 5:46 am Thanks gentlemen. MDK, which flag is that? Maybe Nike could use that one on their new shoes.
Its a real piece of history - the Revolutionary Air Force, the motivator for the modern day RAF.
MDK
Posts: 448
Joined: Sun Apr 08, 2018 5:43 pm
Year and Model: 1998 xc 70
Location: Ohio
Been thanked: 28 times

Re: Wouldn't pass State Inspection

Post by MDK »

You know Mr detail... when you drive a Volvo people think you own a bank or a small conglomerate....
get the parts you need...go to another garage and have your parts installed we're not swapping spit here.. get it the alignment and show the other garage your backside..
Post Reply
  • Similar Topics
    Replies
    Views
    Last post