
Get email notification of topic replies. Log in or register (free). Amazon Link Buy anything with this and it helps MVS!
Engine running for xc70 but its not moving when put in drive gear or reverse gear
-
- Posts: 7484
- Joined: Sat Aug 21, 2010 12:20 am
- Year and Model: Lots
- Location: Melbourne Australia
- Has thanked: 4 times
- Been thanked: 113 times
Re: Engine running for xc70 but its not moving when put in drive gear or reverse gear
Is there a turbine-like whining noise when you rev over 1,500rpm?
Symptoms point to either a transmission pump failure or filter screen blockage.
Symptoms point to either a transmission pump failure or filter screen blockage.
Current cars:2002 XC70, 2006 Ssangyong Rodius (Stavic), 2006 XC90 2.5T, VW Transporter 2.5TDI
www.precisioncarmodules.com.
www.precisioncarmodules.com.
-
- Posts: 1070
- Joined: Wed Jan 28, 2009 9:38 am
- Year and Model: S80 / 2005
- Location: Atlanta, GA
- Been thanked: 27 times
Re: Engine running for xc70 but its not moving when put in drive gear or reverse gear
Have you done any recent work on one of the axles such it might not be fully connected at the splines? (Long shot, I know.)
- oragex
- Posts: 5212
- Joined: Fri May 24, 2013 6:20 am
- Year and Model: S60 2003
- Location: Canada
- Has thanked: 102 times
- Been thanked: 322 times
- Contact:
Re: Engine running for xc70 but its not moving when put in drive gear or reverse gear
All the above + too low fluid will cause the car not to move - however since you can't drive the car, you can't measure the fluid because it can get warmed up enough to get a good lecture
Several Volvo Repair Videos https://www.youtube.com/playlist?list=P ... s0FSVSOT_c
-
- Posts: 6917
- Joined: Wed Mar 31, 2010 9:54 am
- Year and Model: 2004 V70 2.5T
- Location: Omaha NE
- Been thanked: 164 times
Re: Engine running for xc70 but its not moving when put in drive gear or reverse gear
That is not true.
You can check ATF level with engine OFF and COLD.
I posted the trick in forum, you just need to know where on the ATF dipstick to look at.
You can check ATF level with engine OFF and COLD.
I posted the trick in forum, you just need to know where on the ATF dipstick to look at.
2004 V70 2.5T 100K+
2005 XC90 2.5T 110K+
2005 XC90 2.5T 110K+
-
- Posts: 6917
- Joined: Wed Mar 31, 2010 9:54 am
- Year and Model: 2004 V70 2.5T
- Location: Omaha NE
- Been thanked: 164 times
Re: Engine running for xc70 but its not moving when put in drive gear or reverse gear
O.O.
Year modwl mileage?
I see this every day...people post messages to get help and yet the most essential info such as year, model and mileage is rarely posted? Maybe we can read people's mind?
Year modwl mileage?
I see this every day...people post messages to get help and yet the most essential info such as year, model and mileage is rarely posted? Maybe we can read people's mind?
2004 V70 2.5T 100K+
2005 XC90 2.5T 110K+
2005 XC90 2.5T 110K+
- MDK
- Posts: 450
- Joined: Sun Apr 08, 2018 5:43 pm
- Year and Model: 2004 S60R
- Location: Ohio
- Been thanked: 28 times
Re: Engine running for xc70 but its not moving when put in drive gear or reverse gear
Yeah cn90...people panic when they breakdown. Year make and mileage are essential. You know they could have a broken passenger side axle. That happened to me on my 1997 850 R wagon...
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 237 Views
-
Last post by 1998XC70-AWD
-
- 1 Replies
- 366 Views
-
Last post by dj_v70
-
- 1 Replies
- 199 Views
-
Last post by 93Regina