cn90, good to see you again. I still owe you for the relay. I'd still be glad to paint a car for you. This is my V70... with a few extra pieces...cn90 wrote: ↑03 Sep 2019, 19:40 - I always add a tiny bit of wheel bearing grease (about one drop). This way next time it is easier. Have used this trick for 30 years.
- Don't scratch the paint work with your breaker bar!
- A guy on youtube used floor jack to undo the AXLE NUT and it work, see video below...
Loosen ANY lug nut
-
dalel
- Posts: 40
- Joined: 13 December 2017
- Year and Model: 1998 V70
- Location: Louisville
- Has thanked: 4 times
- Been thanked: 3 times
Re: Loosen ANY lug nut
- Attachments
-
- myV70_1.JPG (127.51 KiB) Viewed 1198 times
-
amblerman
- Posts: 509
- Joined: 18 January 2017
- Year and Model: 1999 s70
- Location: Pennsylvania
- Has thanked: 2 times
- Been thanked: 70 times
dalel wrote: ↑03 Sep 2019, 20:36cn90, good to see you again. I still owe you for the relay. I'd still be glad to paint a car for you. This is my V70... with a few extra pieces...cn90 wrote: ↑03 Sep 2019, 19:40 - I always add a tiny bit of wheel bearing grease (about one drop). This way next time it is easier. Have used this trick for 30 years.
- Don't scratch the paint work with your breaker bar!
- A guy on youtube used floor jack to undo the AXLE NUT and it work, see video below...
Great picture.. quite a lot of interesting mods going on there.. Can't imagine you get much life out of the tires though.
-
wizechatmgr
- Posts: 1798
- Joined: 12 January 2017
- Year and Model: 1999 V70 XC AWD 2.4T
- Location: Albany, NY area
- Has thanked: 45 times
- Been thanked: 126 times
- Contact:
Ultimately the lugs shouldn't be on that tight... In a jam this is a great idea.
Wisdom requires knowledge as a prerequisite, but knowledge can be developed due to a lack of wisdom.
In order to learn how to fix something, you must first learn how to break it.
1999 V70 XC AWD 2.4 T -- ~231k miles
1998 V70 2.4 NA -- ~184k miles
In order to learn how to fix something, you must first learn how to break it.
1999 V70 XC AWD 2.4 T -- ~231k miles
1998 V70 2.4 NA -- ~184k miles
-
wizechatmgr
- Posts: 1798
- Joined: 12 January 2017
- Year and Model: 1999 V70 XC AWD 2.4T
- Location: Albany, NY area
- Has thanked: 45 times
- Been thanked: 126 times
- Contact:
Should replace that with one that says FCP =P
Wisdom requires knowledge as a prerequisite, but knowledge can be developed due to a lack of wisdom.
In order to learn how to fix something, you must first learn how to break it.
1999 V70 XC AWD 2.4 T -- ~231k miles
1998 V70 2.4 NA -- ~184k miles
In order to learn how to fix something, you must first learn how to break it.
1999 V70 XC AWD 2.4 T -- ~231k miles
1998 V70 2.4 NA -- ~184k miles
-
cn90
- Posts: 8249
- Joined: 31 March 2010
- Year and Model: 2004 V70 2.5T
- Location: Omaha NE
- Has thanked: 4 times
- Been thanked: 466 times
When I buy any used car, this is what I do for the wheels to avoid seized wheels:
1. Jack up each wheel.
2. Remove all the lugs and remove the wheel.
If the wheel is seized onto the hub (snow area with salt), there is trick in forum to undo it, search for the tricks.
3. Apply anti-seize around the hub bore. Also a bit of anti-seize on each lug (about "one drop" of anti-seize).
4. Now your wheel can be replaced in the middle of nowhere without being seized.
1. Jack up each wheel.
2. Remove all the lugs and remove the wheel.
If the wheel is seized onto the hub (snow area with salt), there is trick in forum to undo it, search for the tricks.
3. Apply anti-seize around the hub bore. Also a bit of anti-seize on each lug (about "one drop" of anti-seize).
4. Now your wheel can be replaced in the middle of nowhere without being seized.
2004 V70 2.5T 100K+
2005 XC90 2.5T 110K+
2005 XC90 2.5T 110K+
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 888 Views
-
Last post by zombielinux
-
- 26 Replies
- 10638 Views
-
Last post by abscate