Marking "Topic Solved" is functional again. It's the green check next to your post. BTW, please do use this when your question is answered and verified. Thanks!
Get email notification of topic replies. Log in or register (free). Amazon Link Buy anything with this and it helps MVS!
Rear Caliper 10mm or 11mm mounting holes..? 5003813 5003814
- BlackBart
- Posts: 1349
- Joined: Sat Dec 10, 2016 5:03 pm
- Year and Model: 2004 XC70 BlackBetty
- Location: Montana
- Has thanked: 100 times
- Been thanked: 102 times
Rear Caliper 10mm or 11mm mounting holes..? 5003813 5003814
In ordering new calipers for the rear of my '94 850T, I'm seeing two part numbers. One says "with 10mm mounting holes," the other says "with 11mm mounting holes."
So, I'm a bit confused here - the bolt is a 10mm shaft, so of course the hole is just a hair bigger than that. How literal do you think that is? The hole measures maybe 10.5mm.
I though there was only one 850 rear caliper.
So, I'm a bit confused here - the bolt is a 10mm shaft, so of course the hole is just a hair bigger than that. How literal do you think that is? The hole measures maybe 10.5mm.
I though there was only one 850 rear caliper.
ex-1984 245T wagon
1994 850T wagon
2004 XC70 wagon BlackBetty
Is it time for a 1964 122 wagon?
1994 850T wagon
2004 XC70 wagon BlackBetty
Is it time for a 1964 122 wagon?
- abscate
- MVS Moderator
- Posts: 23770
- Joined: Sun Feb 17, 2013 5:54 pm
- Year and Model: 99T5 ,99S70,2005V70
- Location: NYC, ALBANY NY
- Has thanked: 443 times
- Been thanked: 1339 times
Re: Rear Caliper 10mm or 11mm mounting holes..??
put your VIN into VOLVO OEM parts and see if you can get clarity there.
M10x30 (947327) shown on
https://www.volvopartswebstore.com
M10x30 (947327) shown on
https://www.volvopartswebstore.com
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 BMW
Link to Maintenance record thread
Link To Volvo Glossary
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 BMW
Link to Maintenance record thread
Link To Volvo Glossary
- BlackBart
- Posts: 1349
- Joined: Sat Dec 10, 2016 5:03 pm
- Year and Model: 2004 XC70 BlackBetty
- Location: Montana
- Has thanked: 100 times
- Been thanked: 102 times
Re: Rear Caliper 10mm or 11mm mounting holes..??
Thanks. I'm not seeing anywhere to enter VIN there. I see the M10 bolt.
On my car they list two at the rear, 5003814 and 5003813 - they don't say which is left or right, but that's my assumption....
What do you think "for 3546491-6" and "for 3546492-4" mean? Those aren't VINs I don't think. Mine is 2065786, miles from those numbers.
They also list a single (which side??) 850R and T5-R caliper for $260, "Genuine Classic Part."
<EDIT> It appears # 5003814 is LEFT
# 5003813 is RIGHT
On my car they list two at the rear, 5003814 and 5003813 - they don't say which is left or right, but that's my assumption....
What do you think "for 3546491-6" and "for 3546492-4" mean? Those aren't VINs I don't think. Mine is 2065786, miles from those numbers.
They also list a single (which side??) 850R and T5-R caliper for $260, "Genuine Classic Part."
<EDIT> It appears # 5003814 is LEFT
# 5003813 is RIGHT
ex-1984 245T wagon
1994 850T wagon
2004 XC70 wagon BlackBetty
Is it time for a 1964 122 wagon?
1994 850T wagon
2004 XC70 wagon BlackBetty
Is it time for a 1964 122 wagon?
- erikv11
- Posts: 10144
- Joined: Sat Jul 25, 2009 2:03 pm
- Year and Model: 850, V70, S60R, XC70
- Location: Iowa
- Has thanked: 129 times
- Been thanked: 364 times
Re: Rear Caliper 10mm or 11mm mounting holes..?
The VIN is a bit longer string than that, and includes letters are well as numbers.
https://www.volvoclub.org.uk/vin_850.shtml
https://www.volvoclub.org.uk/vin_850.shtml
'95 854 T5-R, Motronic 4.4, 185k
'96 855 NA, 145k
'98 S70 NA, 220k (living out west)
'98 V70, T5 tune-injectors-turbo, LPT engine, 293k
'06 S60 R, 167k
'07 XC70, 170k
'99 Camry V6
130k
gone: '96 NA 850 210k, '98 NA V70 182k
'96 855 NA, 145k
'98 S70 NA, 220k (living out west)
'98 V70, T5 tune-injectors-turbo, LPT engine, 293k
'06 S60 R, 167k
'07 XC70, 170k
'99 Camry V6

gone: '96 NA 850 210k, '98 NA V70 182k
- erikv11
- Posts: 10144
- Joined: Sat Jul 25, 2009 2:03 pm
- Year and Model: 850, V70, S60R, XC70
- Location: Iowa
- Has thanked: 129 times
- Been thanked: 364 times
Re: Rear Caliper 10mm or 11mm mounting holes..??
Those are caliper part numbers, search for things like "Volvo 3546491" etc you will get the info.
'95 854 T5-R, Motronic 4.4, 185k
'96 855 NA, 145k
'98 S70 NA, 220k (living out west)
'98 V70, T5 tune-injectors-turbo, LPT engine, 293k
'06 S60 R, 167k
'07 XC70, 170k
'99 Camry V6
130k
gone: '96 NA 850 210k, '98 NA V70 182k
'96 855 NA, 145k
'98 S70 NA, 220k (living out west)
'98 V70, T5 tune-injectors-turbo, LPT engine, 293k
'06 S60 R, 167k
'07 XC70, 170k
'99 Camry V6

gone: '96 NA 850 210k, '98 NA V70 182k
- BlackBart
- Posts: 1349
- Joined: Sat Dec 10, 2016 5:03 pm
- Year and Model: 2004 XC70 BlackBetty
- Location: Montana
- Has thanked: 100 times
- Been thanked: 102 times
Re: Rear Caliper 10mm or 11mm mounting holes..?
Right, that's just the production number.
Searching for those circles you back to 5003813 and 814.
Searching for those circles you back to 5003813 and 814.
ex-1984 245T wagon
1994 850T wagon
2004 XC70 wagon BlackBetty
Is it time for a 1964 122 wagon?
1994 850T wagon
2004 XC70 wagon BlackBetty
Is it time for a 1964 122 wagon?
- BlackBart
- Posts: 1349
- Joined: Sat Dec 10, 2016 5:03 pm
- Year and Model: 2004 XC70 BlackBetty
- Location: Montana
- Has thanked: 100 times
- Been thanked: 102 times
Re: Rear Caliper 10mm or 11mm mounting holes..?
If you go to FCP, they list a right rear Centric, "with smaller mounting holes." Not very specific, is it?
https://www.fcpeuro.com/products/volvo- ... -142-39511
The left Centric says nothing about hole size.
Ipd has rebuilt rears, with no mention of holes.
https://www.fcpeuro.com/products/volvo- ... -142-39511
The left Centric says nothing about hole size.
Ipd has rebuilt rears, with no mention of holes.
ex-1984 245T wagon
1994 850T wagon
2004 XC70 wagon BlackBetty
Is it time for a 1964 122 wagon?
1994 850T wagon
2004 XC70 wagon BlackBetty
Is it time for a 1964 122 wagon?
- BlackBart
- Posts: 1349
- Joined: Sat Dec 10, 2016 5:03 pm
- Year and Model: 2004 XC70 BlackBetty
- Location: Montana
- Has thanked: 100 times
- Been thanked: 102 times
Re: Rear Caliper 10mm or 11mm mounting holes..?
11mm, looks like to me.......
ex-1984 245T wagon
1994 850T wagon
2004 XC70 wagon BlackBetty
Is it time for a 1964 122 wagon?
1994 850T wagon
2004 XC70 wagon BlackBetty
Is it time for a 1964 122 wagon?
- BlackBart
- Posts: 1349
- Joined: Sat Dec 10, 2016 5:03 pm
- Year and Model: 2004 XC70 BlackBetty
- Location: Montana
- Has thanked: 100 times
- Been thanked: 102 times
Re: Rear Caliper 10mm or 11mm mounting holes..?
I took at risk at Rock Auto reman by Nugeon, since I've read up on their rebuilding process. 11mm.
It seems people here on MVS have had poor results with Cardone and Centric, I don't know who rebuilds AC Delco's, and Ipd won't tell you who rebuilds theirs. FCP only has Centric.
I haven't bought anything from Rock Auto in years, and I'm skeptical. One thing I noticed is it's all very organized with easy links explaining every part of searching and ordering, but there is no way to add notes to your order to verify, no way to contact them, no email, no address - it's all designed to not have to pay humans, hence the prices. Drop shipped from "Warehouse A," it seems.
It seems people here on MVS have had poor results with Cardone and Centric, I don't know who rebuilds AC Delco's, and Ipd won't tell you who rebuilds theirs. FCP only has Centric.
I haven't bought anything from Rock Auto in years, and I'm skeptical. One thing I noticed is it's all very organized with easy links explaining every part of searching and ordering, but there is no way to add notes to your order to verify, no way to contact them, no email, no address - it's all designed to not have to pay humans, hence the prices. Drop shipped from "Warehouse A," it seems.
ex-1984 245T wagon
1994 850T wagon
2004 XC70 wagon BlackBetty
Is it time for a 1964 122 wagon?
1994 850T wagon
2004 XC70 wagon BlackBetty
Is it time for a 1964 122 wagon?
- erikv11
- Posts: 10144
- Joined: Sat Jul 25, 2009 2:03 pm
- Year and Model: 850, V70, S60R, XC70
- Location: Iowa
- Has thanked: 129 times
- Been thanked: 364 times
Re: Rear Caliper 10mm or 11mm mounting holes..?
Yeah, I have bought several things from them recently, it is really easy, cheap and efficient, including core returns and even warranty returns, but no humans involved.
'95 854 T5-R, Motronic 4.4, 185k
'96 855 NA, 145k
'98 S70 NA, 220k (living out west)
'98 V70, T5 tune-injectors-turbo, LPT engine, 293k
'06 S60 R, 167k
'07 XC70, 170k
'99 Camry V6
130k
gone: '96 NA 850 210k, '98 NA V70 182k
'96 855 NA, 145k
'98 S70 NA, 220k (living out west)
'98 V70, T5 tune-injectors-turbo, LPT engine, 293k
'06 S60 R, 167k
'07 XC70, 170k
'99 Camry V6

gone: '96 NA 850 210k, '98 NA V70 182k
-
- Similar Topics
- Replies
- Views
- Last post
-
- 13 Replies
- 1241 Views
-
Last post by abscate
-
- 5 Replies
- 1030 Views
-
Last post by Ou2mame
-
- 13 Replies
- 1774 Views
-
Last post by gmh
-
- 15 Replies
- 866 Views
-
Last post by wizechatmgr
-
- 1 Replies
- 423 Views
-
Last post by rspi