Login Register

2004 Volvo S60 rear brake hose removal

Post Reply
Memuns
Posts: 7
Joined: 22 Jun 2012, 13:20
Year and Model: 2004 s60 2.5T
Location: forestville, md

Post by Memuns »

Can anyone tell me how to replace rear brake hose on a 2004 Volvo S60? There's a bracket in the way of the connection at the brake line and the hose. The front one was easy. Please help. Thanks

User avatar
volvolugnut
Posts: 6500
Joined: 19 Jan 2014, 09:51
Year and Model: 2001 V70
Location: Oklahoma USA
Has thanked: 987 times
Been thanked: 1075 times

Post by volvolugnut »

See this post: viewtopic.php?f=1&t=74744

volvolunut
The Fleet:
Volvo: 2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple Volvo parts cars.
Mercedes: 2001 E320, 1973 280, 1974 280C, 1989 300E, 1988 300TE, 1979 300TD, parts cars.
2009 Smart Passion
Ford: 1977 F350, 1964 F150 (2), 1938 Tudor Sedan
Farmall tractors: 1956 400 Diesel, 1946 A
John Deere 214 lawn tractor about 1977 model
And others.

earthworm
Posts: 36
Joined: 05 Dec 2018, 10:28
Year and Model: 2003 S60
Location: York County, PA

Post by earthworm »

I have an '03 ..with a ''soft'' pedal ..even after bleeding and bleeding, using gravity and pressure at the master cylinder . .. I cannot remember any bracket, this was last year .. I guess the bracket must go . And, to do that, you may have to disassemble the entire rear brake system ! "Modern" cars were NOT meant to be worked on ! Key word is ''throw-away''......end of rant … IF I owned the Volvo repair manual , I could help ..Well, now we know why the dealer charges $500 to do only this task !
I found the answer , its under ''similar topics'' - with any number of replies . AND, its not as bad, not nearly as bad as I say it is …

Tonyx
Posts: 157
Joined: 13 Nov 2011, 19:55
Year and Model: 2001 XC70
Location: Michigan
Has thanked: 3 times
Been thanked: 8 times

Post by Tonyx »

I just did the same on my 03 XC70 rear left caliper + hose. It can be done without taking out the whole assembly per link above with a caveat. What I did:

1. clear all debris from the brake tube nut connection with wire brush and spray with liquid wrench( or you favorite )
2. loosen the bracket where the metal brake tube joins to flex tube by undoing the screw attaching it to front part of wheel well - 10mm ratcheting wrench helpful
3. undo the caliper and bracket from rear knuckle and have it ready to remove from vehicle - 15mm bolts. Have the new caliper with flex hose already attached and ready to go.
4. pack towel under above bracket to catch brake fluid
5. disconnect by turning the 13mm brake tube nut on the metal tube side while holding the flex tube nut steady with 14mm wrench. You have space to turn 1/8 turn at the time by flipping the 13mm wrench back and forth. Patience is needed.
6. don't worry about hurrying as you loose only about 30% of fluid on the brake fluid reservoir working steadily
7. install is reverse of removal :)
2003 XC70 230K and counting..,

earthworm
Posts: 36
Joined: 05 Dec 2018, 10:28
Year and Model: 2003 S60
Location: York County, PA

Post by earthworm »

EXCELLENT response
thank yous are in order …
Working on a Volvo DOES require patience !

User avatar
abscate
MVS Moderator
Posts: 36137
Joined: 17 Feb 2013, 17:54
Year and Model: 99: V70s S70s,05 V70
Location: Port Jefferson Long Island NY
Has thanked: 1609 times
Been thanked: 4064 times

Post by abscate »

7. install is reverse of removal :)
I folllowed this exactly and the worst part was picking up the brake fluid and putting it back into the hose.

:lol:
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread

Tonyx
Posts: 157
Joined: 13 Nov 2011, 19:55
Year and Model: 2001 XC70
Location: Michigan
Has thanked: 3 times
Been thanked: 8 times

Post by Tonyx »

Well played abscate:) I'll watch how I write next time!
2003 XC70 230K and counting..,

Post Reply
  • Similar Topics
    Replies
    Views
    Last post