MoVolvos wrote: ↑Sat Nov 09, 2019 7:12 pmMine is set up a little differently - there is the larger hose on top but nothing on the back of the PTC itself as in the diagram.cfelberg wrote: ↑Sat Nov 09, 2019 7:02 pmScroll down and see the PTC diagram. It shows a large and small vacuum line. I believe the small one was clogged on mine. It's been awhile.MoVolvos wrote: ↑Sat Nov 09, 2019 6:53 pm
There is just one hose that goes directly to the top of the PTC and it is the hose from that long 90 degree hose assembly from the breather box. There are a couple of small vacuum lines that enter the turbo intake tube very near the PTC on their own nipples, but not connected to the PTC directly. Are these the ones you are thinking of?
http://lakesidedp.com/uploadpics/pcv/
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link
Buy your stuff using this and it helps MVS!
2002 volvo s60 2.4t PCV still blocked after service/replacement
-
- Posts: 15
- Joined: Fri Nov 04, 2016 2:01 pm
- Year and Model: 2002 s60
- Location: San Diego
- Has thanked: 2 times
- Been thanked: 0
Re: 2002 volvo s60 2.4t PCV still blocked after service/replacement
- MoVolvos
- Posts: 2071
- Joined: Sun Jan 15, 2012 6:47 pm
- Year and Model: 03S80T6~08C30T5
- Location: NC
- Has thanked: 23 times
- Been thanked: 44 times
Re: 2002 volvo s60 2.4t PCV still blocked after service/replacement
I see a bump. Has that been closed off on your car?cfelberg wrote: ↑Sat Nov 09, 2019 7:43 pmMine is set up a little differently - there is the larger hose on top but nothing on the back of the PTC itself as in the diagram.MoVolvos wrote: ↑Sat Nov 09, 2019 7:12 pm
Scroll down and see the PTC diagram. It shows a large and small vacuum line. I believe the small one was clogged on mine. It's been awhile.
http://lakesidedp.com/uploadpics/pcv/
-
https://www.fcpeuro.com/products/volvo- ... 46#fitment
Blessings,
BKM
1998 S70 T5 - Donated
2003 S80 T6
2003 GS300
2003 Odyssey
2008 C30 T5
2019 Atlas SE 4 Motion
BKM
1998 S70 T5 - Donated
2003 S80 T6
2003 GS300
2003 Odyssey
2008 C30 T5
2019 Atlas SE 4 Motion
-
- Posts: 15
- Joined: Fri Nov 04, 2016 2:01 pm
- Year and Model: 2002 s60
- Location: San Diego
- Has thanked: 2 times
- Been thanked: 0
Re: 2002 volvo s60 2.4t PCV still blocked after service/replacement
I believe so - I saw the bump you are referring to but there was nothing on it.MoVolvos wrote: ↑Sat Nov 09, 2019 8:09 pmI see a bump. Has that been closed off on your car?cfelberg wrote: ↑Sat Nov 09, 2019 7:43 pmMine is set up a little differently - there is the larger hose on top but nothing on the back of the PTC itself as in the diagram.MoVolvos wrote: ↑Sat Nov 09, 2019 7:12 pm
Scroll down and see the PTC diagram. It shows a large and small vacuum line. I believe the small one was clogged on mine. It's been awhile.
http://lakesidedp.com/uploadpics/pcv/
-
https://www.fcpeuro.com/products/volvo- ... 46#fitment
- MoVolvos
- Posts: 2071
- Joined: Sun Jan 15, 2012 6:47 pm
- Year and Model: 03S80T6~08C30T5
- Location: NC
- Has thanked: 23 times
- Been thanked: 44 times
Re: 2002 volvo s60 2.4t PCV still blocked after service/replacement
Sorry, I think they did do away with that fitting there.cfelberg wrote: ↑Sat Nov 09, 2019 8:14 pmI believe so - I saw the bump you are referring to but there was nothing on it.MoVolvos wrote: ↑Sat Nov 09, 2019 8:09 pmI see a bump. Has that been closed off on your car?
-
https://www.fcpeuro.com/products/volvo- ... 46#fitment
Blessings,
BKM
1998 S70 T5 - Donated
2003 S80 T6
2003 GS300
2003 Odyssey
2008 C30 T5
2019 Atlas SE 4 Motion
BKM
1998 S70 T5 - Donated
2003 S80 T6
2003 GS300
2003 Odyssey
2008 C30 T5
2019 Atlas SE 4 Motion
- MoVolvos
- Posts: 2071
- Joined: Sun Jan 15, 2012 6:47 pm
- Year and Model: 03S80T6~08C30T5
- Location: NC
- Has thanked: 23 times
- Been thanked: 44 times
Re: 2002 volvo s60 2.4t PCV still blocked after service/replacement
Can you see if the 2.5T is the same and if you may have missed something?cfelberg wrote: ↑Sat Nov 09, 2019 8:29 amI feel I completed the job correctly but am not sure what to look at next if in fact this is a problem.93SCMax wrote: ↑Sat Nov 09, 2019 8:00 amI've never heard of a "PCV Glove Test" under load, only familiar with the glove test on the oil fill at idle. Are you seeing any new oil leaks on the engine?
If you are confident that you replaced the system correctly, I'd carry on as if it's repaired and only monitor for new leaks.
Blessings,
BKM
1998 S70 T5 - Donated
2003 S80 T6
2003 GS300
2003 Odyssey
2008 C30 T5
2019 Atlas SE 4 Motion
BKM
1998 S70 T5 - Donated
2003 S80 T6
2003 GS300
2003 Odyssey
2008 C30 T5
2019 Atlas SE 4 Motion
- MoVolvos
- Posts: 2071
- Joined: Sun Jan 15, 2012 6:47 pm
- Year and Model: 03S80T6~08C30T5
- Location: NC
- Has thanked: 23 times
- Been thanked: 44 times
Re: 2002 volvo s60 2.4t PCV still blocked after service/replacement
Here is another.
Blessings,
BKM
1998 S70 T5 - Donated
2003 S80 T6
2003 GS300
2003 Odyssey
2008 C30 T5
2019 Atlas SE 4 Motion
BKM
1998 S70 T5 - Donated
2003 S80 T6
2003 GS300
2003 Odyssey
2008 C30 T5
2019 Atlas SE 4 Motion
-
- Posts: 15
- Joined: Fri Nov 04, 2016 2:01 pm
- Year and Model: 2002 s60
- Location: San Diego
- Has thanked: 2 times
- Been thanked: 0
Re: 2002 volvo s60 2.4t PCV still blocked after service/replacement
Yes, it is very similar - the fuel rail is a little different but the process was the same on mine, and all associated fittings and hoses for the breather box were the same - it doesn't appear I have missed anything on these components, thanks!MoVolvos wrote: ↑Sat Nov 09, 2019 8:35 pmCan you see if the 2.5T is the same and if you may have missed something?cfelberg wrote: ↑Sat Nov 09, 2019 8:29 amI feel I completed the job correctly but am not sure what to look at next if in fact this is a problem.93SCMax wrote: ↑Sat Nov 09, 2019 8:00 amI've never heard of a "PCV Glove Test" under load, only familiar with the glove test on the oil fill at idle. Are you seeing any new oil leaks on the engine?
If you are confident that you replaced the system correctly, I'd carry on as if it's repaired and only monitor for new leaks.
- MoVolvos
- Posts: 2071
- Joined: Sun Jan 15, 2012 6:47 pm
- Year and Model: 03S80T6~08C30T5
- Location: NC
- Has thanked: 23 times
- Been thanked: 44 times
Re: 2002 volvo s60 2.4t PCV still blocked after service/replacement
Could there be a vacuum leak and have no codes? When you are accelerating maybe a cracked / loose hose or leak somewhere is bringing air into the intake manifold rather than removing it from the crankcase.
-
-
-
-
Blessings,
BKM
1998 S70 T5 - Donated
2003 S80 T6
2003 GS300
2003 Odyssey
2008 C30 T5
2019 Atlas SE 4 Motion
BKM
1998 S70 T5 - Donated
2003 S80 T6
2003 GS300
2003 Odyssey
2008 C30 T5
2019 Atlas SE 4 Motion
-
- Posts: 15
- Joined: Fri Nov 04, 2016 2:01 pm
- Year and Model: 2002 s60
- Location: San Diego
- Has thanked: 2 times
- Been thanked: 0
Re: 2002 volvo s60 2.4t PCV still blocked after service/replacement
Its worth a shot - I'll have to give it a try, thanks!
- - Pete -
- Posts: 247
- Joined: Fri Dec 06, 2013 10:13 pm
- Year and Model: 01, 04, 04, 04 V70's
- Location: Minnesota/Wisconsin
- Has thanked: 27 times
- Been thanked: 39 times
Re: 2002 volvo s60 2.4t PCV still blocked after service/replacement
VTL & a few others have posted about this before - glove testing at varying RPM’s & loads. I know he is a firm believer in replacing the expensive pipe that runs from the top of the breather box/oil trap back to the turbo. I personally have only done 4-5 of the PCV system’s & I've never replaced that upper ($175) pipe. I’ve always just checked it to verify it isn’t blocked down near the nipple & none I’ve encountered have been so have always just replaced the nipple & have never had an issue. I’m in no way saying he’s wrong (because he rarely is), just that it could be a possibility.
Pretty much any turbo gasser is gonna have blow by, but I’d think that would be more than normal in your case, if blow by is the culprit.
Did you drop your oil pan at all?
Pretty much any turbo gasser is gonna have blow by, but I’d think that would be more than normal in your case, if blow by is the culprit.
Did you drop your oil pan at all?
2001 V70XC 142k
2004 V70 AWD 134k
2004 V70R M66 142k
2004 XC70 278k
2006 XC70 155k Sold
2004 V70 AWD 134k
2004 V70R M66 142k
2004 XC70 278k
2006 XC70 155k Sold
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Pvc seems blocked but where?
by Nismou20 » Mon Feb 22, 2016 8:42 pm » in Volvo S40 & V40 Forum 2000-2004 - 0 Replies
- 659 Views
-
Last post by Nismou20
Mon Feb 22, 2016 8:42 pm
-
-
-
2006 XC70 A/C air flow blocked
by tomk62 » Sun Jun 26, 2016 1:11 pm » in Volvo V70 & XC-70 2001-2007, S60 2001-2009 - 1 Replies
- 263 Views
-
Last post by oragex
Sun Jun 26, 2016 1:51 pm
-
-
-
Glove still blows up after PCV repair.
by jeffsws » Thu Jul 05, 2018 2:18 pm » in Volvo 850, S70, V70, C70, XC models 1992-2000 - 27 Replies
- 1251 Views
-
Last post by abscate
Wed Jul 11, 2018 4:26 am
-
-
-
XC90 Condenser replacement, PCV service, engine mounts
by Tone944 » Sat Aug 31, 2019 9:42 pm » in Volvo XC90 Forum - 1 Replies
- 235 Views
-
Last post by SuperHerman
Sun Sep 01, 2019 7:17 pm
-