Crank Position Sensor pin outs

Joegrent · Post by **Joegrent** » 13 Nov 2019, 11:26

Ordered a sensor (still shipping) and want to check the pin out for it. Have the wiring diagramming and it shows:

Red
Blue
Black

coming from the computer. Since I don't have the part in my hand, not sure if the pins are labelled. Also assuming it is 5V coming from the ECU too to pin 1?? Just not sure and cannot measure the harness pins.

Thanks for the help.

PS I bought the sensor for $4 including shipping. New.

Joegrent · Post by **Joegrent** » 16 Nov 2019, 08:59

Pins are labelled but still need ti know the voltages coming from the ECU and if it is a pull down sensor design.