Login Register

Unknown part with disconnected hose

Post Reply
s3bi
Posts: 14
Joined: 21 Nov 2019, 23:06
Year and Model: 850, 2.4L 10V, 1996
Location: Germany
Has thanked: 18 times

Post by s3bi »

Hi,

I've found a hose which is not connected that's coming from this part:
volvoteilunbekannt.jpeg
partnumber.jpeg
Unfortunately the part number is worn and not readable. I also couldn't find a detailed overview of the parts in the engine bay, where it would be mentioned.
The hose ends at the right side the air filter box.
hoseending.jpeg
Can someone tell me what this part is and where the hose is supposed to go normally?

It's a 1996 Volvo 850, 2.5L 10V 106kW.

Thanks in advance.

User avatar
abscate
MVS Moderator
Posts: 36140
Joined: 17 Feb 2013, 17:54
Year and Model: 99: V70s S70s,05 V70
Location: Port Jefferson Long Island NY
Has thanked: 1609 times
Been thanked: 4064 times

Post by abscate »

It looks like one of the air box hoses that control the hot air flapper.

Look for two fittings on the rear of the air filter box and see if one is open without a hose

There are also cruise control hoses in that area, those go under the air box , I believe
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread

User avatar
volvolugnut
Posts: 6500
Joined: 19 Jan 2014, 09:51
Year and Model: 2001 V70
Location: Oklahoma USA
Has thanked: 987 times
Been thanked: 1075 times

Post by volvolugnut »

It looks like the hose attached to the device in the second photo is near to failure. The hose diameter change at the end of the hose nipple is showing failure cracks. It would be good to replace now before it fails.

Soap Box Rant Alert!

Everyone attempting to service a modern vehicle should periodically check vacuum hoses for signs of failure - swelling, cracking or hardening. Replacement is cheap and often does not require tools or knowledge. Failures may leave you stalled in the road in the dark and wet. Replacing them at your convenience is better and you will learn some about the hose routing. Just be sure to replace with same size and remove only one hose at a time. You might also find some fluid leaks.
Soap Box Rant End.


volvolugnut
The Fleet:
Volvo: 2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple Volvo parts cars.
Mercedes: 2001 E320, 1973 280, 1974 280C, 1989 300E, 1988 300TE, 1979 300TD, parts cars.
2009 Smart Passion
Ford: 1977 F350, 1964 F150 (2), 1938 Tudor Sedan
Farmall tractors: 1956 400 Diesel, 1946 A
John Deere 214 lawn tractor about 1977 model
And others.

User avatar
Stu70
Posts: 171
Joined: 12 Oct 2016, 10:27
Year and Model: 2006 Sonic VR GT
Location: New Zealand
Has thanked: 34 times
Been thanked: 26 times

Post by Stu70 »

Hey, nice engine ! Without that pesky turbo pipe in the road and the collectors edition “DOHC” cover.
1998 S70 10v BiFuel - Sold
2006 Sonic V70R - “this is going to be expensive “

User avatar
Stu70
Posts: 171
Joined: 12 Oct 2016, 10:27
Year and Model: 2006 Sonic VR GT
Location: New Zealand
Has thanked: 34 times
Been thanked: 26 times

Post by Stu70 »

+1 for hose coming round that side of box being cruise vacuum motor line...
Or
From the bottom nipple of air box flap control just been tucked out of the way...
1998 S70 10v BiFuel - Sold
2006 Sonic V70R - “this is going to be expensive “

s3bi
Posts: 14
Joined: 21 Nov 2019, 23:06
Year and Model: 850, 2.4L 10V, 1996
Location: Germany
Has thanked: 18 times

Post by s3bi »

Thanks, I'm going to order a few new parts from Skandix soon (also lost a wheel cap and need a mounting bracket for the gas tank), so I'll get some vacuum hoses as well.

I've encountered another problem, there's a squeaky noise coming from the front right at lower speeds, even when riding over small bumps. I couldn't see anything suspicious in the wheel suspension or the damper when I removed the wheel. I gave everything a good shake but also nothing was loose. A friendly car mechanic thought it could be a part of the wheel fairing, he put on some mounting adhesive but this didn't fix it. Are there any known common causes for this? I could also upload a audio file if it helps.

s3bi
Posts: 14
Joined: 21 Nov 2019, 23:06
Year and Model: 850, 2.4L 10V, 1996
Location: Germany
Has thanked: 18 times

Post by s3bi »

I was able to find out what it is now. It's neither for the hot air flapper nor the cruise control, but for a cold running regulator which did not come with the car but was added afterwards to achieve a better emissions class (Euro2) so the car costs less in taxes.
The vacuum hose that connects to nothing actually connects to nothing, it once had a small air filter piece on the other end, where it pulled in the air that this valve lets through while the motor is cold. There are also variants that use the air filter of the car but there's no hole drilled in for this one.

bronco
Posts: 272
Joined: 11 Aug 2019, 19:21
Year and Model: 1998 V70
Location: boston
Has thanked: 49 times
Been thanked: 24 times

Post by bronco »

volvolugnut wrote: 22 Nov 2019, 10:38 It looks like the hose attached to the device in the second photo is near to failure. The hose diameter change at the end of the hose nipple is showing failure cracks. It would be good to replace now before it fails.

Soap Box Rant Alert!

Everyone attempting to service a modern vehicle should periodically check vacuum hoses for signs of failure - swelling, cracking or hardening. Replacement is cheap and often does not require tools or knowledge. Failures may leave you stalled in the road in the dark and wet. Replacing them at your convenience is better and you will learn some about the hose routing. Just be sure to replace with same size and remove only one hose at a time. You might also find some fluid leaks.
Soap Box Rant End.


volvolugnut
Don't sell your soapboxes short!

I know someone who buys old wooden ivory soap boxes and resells them for a nice profit

Post Reply
  • Similar Topics
    Replies
    Views
    Last post