Login Register

04' XC90 not starting issues

Post Reply
keithhitch
Posts: 6
Joined: 05 Aug 2014, 11:08
Year and Model: V70 XC 2000
Location: Philadelphia, PA

Post by keithhitch »

All,

I have a 2004 XC90 that I have had for about 2 years. Did lots of minor fixes and was able to get rid of all of the trouble codes. It has been fine for over a year. Recently my sons started driving it. It stopped running on them about a block from the house and will not start now. I checked and got a ECM-5200 code. SInce this code I have done the following: Replaced Crank position sensor, replace camshaft position sensor, cleaned MAF, charged battery (less than 2 yrs old) because it had run low after multiple tries, found that the fuel pump was not producing much pressure, replaced fuel pump, replaced spark plugs.

Still not starting - if anyone can point me in a good direction I would be very happy to have the help.

I have been owning Volvo's for the last 8 - 10 years. I love them and they run great. This forum has saved me tons of money because I don't have to go to dealers.

Thank you all,
Keith

User avatar
RickHaleParker
Posts: 7203
Joined: 25 May 2015, 14:30
Year and Model: See Signature below.
Location: Kansas
Has thanked: 8 times
Been thanked: 979 times

Post by RickHaleParker »

Give it a three second shot of starting fluid to determine if it is a fuel delivery problem or not. If it fires on starting fluid, it is a fuel delivery problem. If it does not fire on starting fluid, look elsewhere.
Active
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )

gstallons
Posts: 62
Joined: 22 Dec 2014, 19:35
Year and Model: 2004 XC90
Location: ky
Been thanked: 1 time

Post by gstallons »

Are you using a scanner to diagnose your no-start condition ?

Post Reply
  • Similar Topics
    Replies
    Views
    Last post