3.2 XC70 head tightening torque?
3.2 XC70 head tightening torque?
Hi all, new member here... I have a 2010 XC70 3.2 six cylinder non-turbo with a blown head gasket. Have removed head, had it re-surfaced, bought gaskets, bolts and timing gear special tools, but I can't find anywhere online where the head bolt tightening sequence, torque and final (tightening angle?) are available... I would like to get this job done this weekend if possible!!! Any help would be much appreciated..
-
RickHaleParker
- Posts: 7129
- Joined: 25 May 2015
- Year and Model: See Signature below.
- Location: Kansas
- Has thanked: 8 times
- Been thanked: 958 times
Pass 1. Bolts 1-14 45 Nm
Pass 2. Bolts 1-14 45 Nm (again)
Pass 3. Bolts 1-14 45 90°
Pass 4. Bolts 1-14 45 180°
Pass 2. Bolts 1-14 45 Nm (again)
Pass 3. Bolts 1-14 45 90°
Pass 4. Bolts 1-14 45 180°
⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
RickHaleParker wrote: ↑06 Dec 2019, 15:53 Pass 1. Bolts 1-14 45 Nm
Pass 2. Bolts 1-14 45 Nm (again)
Pass 3. Bolts 1-14 45 90°
Pass 4. Bolts 1-14 45 180°
2019-12-06 (1).png
Hi Rick,
What is the head bolt torque spec for Volvo 2009 S80 2.5T B5254T6 engine.
Thanks
Eric
-
- Similar Topics
- Replies
- Views
- Last post