MAP Sensor location Topic is solved

MALL240 · Post by **MALL240** » 22 Feb 2020, 04:39

Hi, have a 240 2.3 1990. I spend 3 days searching the MAP sensor, but i didnt find it... I read manuals, diagrams... nothing... can somebody help? Thanks a lot

Post by **RickHaleParker** » 22 Feb 2020, 10:59

Why would you be looking for a MAP (Manifold Absolute Pressure) sensor on a 1990 240?

MALL240 · Post by **MALL240** » 24 Feb 2020, 01:25

jajajajajaja please tell me this model use this!!! Really?? Dont use MAP this model? Why in the parts online shop say me this MAP its working?

Thanks

93Regina · Post by **93Regina** » 24 Feb 2020, 06:50

MALL240 wrote: 24 Feb 2020, 01:25...240 2.3 1990...Why in the parts online shop say me this MAP its working?

In US, Volvo used

1982 B21F Bosch LH 1.0 / 2.0
1983-1984 Bosch LH 2.1
1985-1989 Bosch LH 2.2
1989-1993 Bosch LH 2.4
1990-1993 Bosch LH 3.1

LH 2.3 - "... Porsche 928 from the 1987 model year until the car ceased production in 1994. Earlier cars, LH equipped, such as the Euro S2 (84 -’86) and the US market early 32v (’85 – ’86) used the LH 2.2 system."

Please cite this online site where your 240 Volvo has a LH 2.3.

Bosch's LHs used an AMM (MAF)....MAF and MAP are not the same. Is yours a LH 2.4 or LH 3.1?

MALL240 · Post by **MALL240** » 25 Feb 2020, 00:07

HI, LH 2.4 115cv CAT. My car have MAF. I didnt know i dont have MAP... b ut... i cant understand that this part shows like its fit on my car... should be wrong...

My car is from Switzerland.

Este producto corresponde a su VOLVO 240 Familiar (P245) 2.3 i CAT

NGK Sensor, presión colector de admisión 92477 originales de calidad
MOTOR
SENSOR DE PRESIÓN DEL AIRE DE ADMISIÓN
NGK SENSOR, PRESIÓN COLECTOR DE ADMISIÓN

https://www.autodoc.es/ngk/10506047

thanks.

On the up side you can read: This product is for your VOLVO 240 wagon (P245) 2.3 i CAT.

MALL240 · Post by **MALL240** » 25 Feb 2020, 00:10

PASSENGER CAR COMPATIBILITY
VOLVO 240 Family (P245) 2.3 i CAT, Year 08.1986 - 07.1993, 2316 , 115 HP

VOLVO
VOLVO 240 Saloon (P242, P244) (Year 08.1986 - 07.1993, 113 - 115 HP, Gasoline)
VOLVO 240 Family (P245) (Year 08.1986 - 07.1993, 113 - 115 HP, Gasoline)

Post by **RickHaleParker** » 25 Feb 2020, 00:41

NGK 92477 = Volvo 1378162
On a metal plate near the left fender. Rubber hose running to intake manifold.

MALL240 · Post by **MALL240** » 25 Feb 2020, 01:02

Hi RIck, thanks a lot. I spend almost days looking in that place, but i didt see nothing... its possible the MAP was inside of the wheel way? unnnder the metal? Becouse i count all the rubber house. In the intake manifold only goes two tubes, and goes to the air filter on the front left wheel...

I believe for the acces to the MAP its under the road pass, and i need disassemble wheel arch?

Thanks a lot!

Can i send a photos? thanks

My engine is B230F

Post by **RickHaleParker** » 25 Feb 2020, 01:04

Looks like it is at same location as the Ignition coil.

MALL240 · Post by **MALL240** » 25 Feb 2020, 01:07

Thanks Rick, cant see nothing...i dond understand

in the 1 image, can i see 2 holes...pfff maybe under??